Necking up 7mm-08 to 308

[bowhunter-tw]

I have some 7mm-08 brass. I see a lot about necking down 308 to 7mm-08 but nothing about going the other way. I have some 7-08 brass and was wondering if its worth sizing up or should I just sell to someone who needs 7-08?

[Couesdeer]

I have a friend who has done this exact thing with 100s of 7-08 1x fired brass.  Worked fine.  Run them through your .308 sizing die.  You should be good to go.

That being said, If you prefer to sell it, I shoot the heck out of 7-08 and would be interested in your brass.

[bowhunter-tw]

2 hours ago, Couesdeer said:

I have a friend who has done this exact thing with 100s of 7-08 1x fired brass.  Worked fine.  Run them through your .308 sizing die.  You should be good to go.

That being said, If you prefer to sell it, I shoot the heck out of 7-08 and would be interested in your brass.

I may be interested in trading for 7mm rem mag brass if you have any of that? 

[zackcarp]

I resize 243 to 7mm-08 all the time. Its easy to size up rather than size down bc you'd have to trim.