Arrow fletcher

[Huntn coues]

Is there a fletching tool out there that will do a variety of different size fletches?

Any advice would be appreciated.

 

I did look at the AZ easy fletch but was told it only does the bigger vanes and not the blazers

[Red Rabbit]

I have the JoJan and have done fearthers, regular vanes, blazers on cedars, aluminums and carbon shafts. With the Blazers, I put also glued a vane to the front of the clamp to support that end of the clamp along the shaft while gluing the rear Blazer to the shaft.

[Huntn coues]

I have the JoJan and have done fearthers, regular vanes, blazers on cedars, aluminums and carbon shafts. With the Blazers, I put also glued a vane to the front of the clamp to support that end of the clamp along the shaft while gluing the rear Blazer to the shaft.

 

 

Hey RR-

 

Does the Jojan do all three vanes at the same time?

[Red Rabbit]

With the Jo Jan multi-fletcher, it can do six arrows at a time, but only it only does one vane/feather at time per arrow.

http://www.jojan.net/index.php

 

Doug~RR

[elmergoo]

Is there a fletching tool out there that will do a variety of different size fletches?

Any advice would be appreciated.

 

I did look at the AZ easy fletch but was told it only does the bigger vanes and not the blazers

Check back into AZ Easy Fletch. Did all my 2" Blazers and when I bought a dozen from Archery Headquarters they used the EZ Fletch for 2" blazers for those arrws to. The secret is the glue and pressure. I believe they used Bohning Gel and only use light pressure when you crank them down.

[Dick]

I have used the Bitenburger and the AZ EZFletch both, both work well for blazers with the EZ Fletch obviously being much faster, you do three vanes at once instead of one at a time!

[crazy4COUES]

I USE THE AZ EZ FLETCHER FOR ALL MY BLAZERS, WORKS GREAT!

[galiuro mountain man]

If you want one that will last forever, use the Bitzenberger. Then you can get different styles of clamps for helical and stuff. They are also fully adjustable and can do three vanes or four and will work with any vanes or feathers.

 

If you want to be limited to what kind of set up you want then get any of the others. I own two of the jo jans and have them screwed to one bench inline so I can do 12 at a time and never use them. They are harder to use and I can fletch carbon arrows faster with the bitz.

[elpepe25]

ive had an AAE, a jo jan or 2 but the BITZ is the best there is by far

[tcharchery]

I use the easyfletch and it works well with Blazers as well as other vanes. I just bought the Bohning tower fletcher thinking I would upgrade. Went back to the easyfletcher. The tower is for sale. I just don't like it.