broadhead Report post Posted September 11, 2020 I recently picked up an induction annealer. In talking to a few guys it occurred to me that more guys would anneal more regularly if it wasn't for the time and hassle (and price) of everything that comes with it. If anyone is interested in having their brass annealed I would be happy to do it for you for $10 per 100 rounds. I'm in the Tucson area and would be willing to meet you somewhere if you would like to have it done. If not in the area I would still happily run them for the price of shipping back to you. Currently I have the pilots and shell holders to anneal 308 WIN, 243 WIN, 7mm-08, 260 REM, and 6.5 PRC. The necessary parts for 6.5 CM, 6mm CM, 300 win mag, and 7mm Rem mag can be here in a few days if I get the interest. If you have a less common cartridge and are interested let me know and we can discuss it. Obviously not trying to get rich with it but I don't mind doing it so if you're interested reach out. Please PM me if you would like the details on the annealer and the process. 2 Share this post Link to post Share on other sites
5alivefishing Report post Posted September 11, 2020 Great idea, 2 Share this post Link to post Share on other sites
broadhead Report post Posted September 11, 2020 I had some interest so I can explain the annealer a little bit. The machine is an Annealing Made Perfect (AMP) that uses induction heating rather than flame. If you are annealing a particular piece of brass for the first time with the machine (i.e. Lapua 6.5 CM) you must first analyze a piece of brass for the annealer to determine the proper heat and time to anneal. The analysis process destroys that piece of brass and generates a code that is used for the rest of the brass for that brand. If you are doing serious precision shooting AMP recommends analyzing one piece of brass from that manufacturer each time you get a new lot. Generally speaking, the higher quality the brass the less variance there will be between lots but if that much detail is not required for what you need it's probably not necessary. If I have to analyze a piece of brass before I anneal it because it's a new one for me I will knock a dollar off the price per 100 casings annealed to make up for sacrificing a piece of your brass. If you don't shoot extreme long range and you use quality brass like Norma, ADG, or Lapua it is less likely you will notice a difference between lots but that is your call to make. Once the machine has the code needed for that case (brand and caliber) it's just plug and play. There is no need to eye up heating times, no need for Tempilaq, and no judgement calls, i.e human error, on whether the brass is annealed properly. The machine is ready to go right out of the box (literally) as long as you have the pilots and shell holders. As of now I have the parts needed for the calibers listed above and have the parts for 6.5 Creedmoor, 6mm Creedmoor, 7mm Rem Mag, and 300 RUM on the way. If interested please don't be shy. The process is actually fun for me so if it helps shooters get a little better performance out of their brass then all the better. 2 Share this post Link to post Share on other sites
broadhead Report post Posted September 22, 2020 TTT Share this post Link to post Share on other sites
Oso Verde Report post Posted September 22, 2020 Pm sent 1 Share this post Link to post Share on other sites
tomkat12 Report post Posted September 23, 2020 Interested...been sending mine out of state. 1 Share this post Link to post Share on other sites
5alivefishing Report post Posted September 23, 2020 It has been a pleasure working with Broadhead. Deal with confidence. Tim 1 Share this post Link to post Share on other sites
broadhead Report post Posted September 23, 2020 2 hours ago, tomkat12 said: Interested...been sending mine out of state. What caliber do you need annealed? Share this post Link to post Share on other sites
CraigK Report post Posted September 23, 2020 What an awesome offer. I will be interested as well. 1 Share this post Link to post Share on other sites
Len901 Report post Posted September 23, 2020 i would be interested too i have a 6.5 cm 2 Share this post Link to post Share on other sites
broadhead Report post Posted September 23, 2020 46 minutes ago, Len901 said: i would be interested too i have a 6.5 cm PM if you want them done. Share this post Link to post Share on other sites
broadhead Report post Posted September 27, 2020 TTT Thanks for the interest so far. Share this post Link to post Share on other sites
dcshorthairs Report post Posted October 3, 2020 I’m going to send you my 6.5 after I shoot some more rounds. 1 Share this post Link to post Share on other sites
Oso Verde Report post Posted October 4, 2023 You still doing annealing? Share this post Link to post Share on other sites
