Edge Report post Posted July 3, 2020 13 minutes ago, bojangles said: Can you re-thread the cleaning jag by putting the ramrod down the barrel and spinning it? I had a similar situation with my TC Renegade. The metal tips on the factory ramrod are threaded in a shallow fashion onto a wooden dowel. I removed and sanded the glue off the wood, epoxyed the tips back on. A pin through them tips would've been a good idea too. Share this post Link to post Share on other sites
idgaf Report post Posted July 7, 2020 UPDATE. I took off the nipple and filled it with powder. After the third attempt of increasing the amount I got it out! Cleaning jags fly pretty straight. 4 1 Share this post Link to post Share on other sites
muledeerarea33? Report post Posted July 7, 2020 Now buy a metallic or fiber rod and be done with that. 2 Share this post Link to post Share on other sites
zackcarp Report post Posted July 8, 2020 On 7/6/2020 at 7:43 PM, idgaf said: UPDATE. I took off the nipple and filled it with powder. After the third attempt of increasing the amount I got it out! Cleaning jags fly pretty straight. I'm amazed you found it. Last one I dislodged was unrecoverable. Share this post Link to post Share on other sites
Edge Report post Posted July 8, 2020 On 7/6/2020 at 7:43 PM, idgaf said: UPDATE. I took off the nipple and filled it with powder. After the third attempt of increasing the amount I got it out! Cleaning jags fly pretty straight. How low are the serial numbers on the Renegade? Share this post Link to post Share on other sites
Titanium700 Report post Posted July 12, 2020 On 7/6/2020 at 10:51 PM, muledeerarea33? said: Now buy a metallic or fiber rod and be done with that. Yup. I use a metal takedown one and store it in my backpack. Share this post Link to post Share on other sites
wildwoody Report post Posted July 12, 2020 When unloading mine I use the co2 airblaster used for unloading.. Share this post Link to post Share on other sites
