elwood Report post Posted August 5, 2019 I just converted a 77/22 Hornet to K-Hornet and am splitting a lot the cases during fire forming. From all the research I've done it looks like my Nosler brass needs to be annealed prior to fire forming. Does anyone have an annealing machine that can handle this little case and is willing to do a few for me? I will gladly pay for the service and if it solves my problem will have 150 pieces that need to be done. PM or my cell is 520-237-9643. Thank you. -Eliot Share this post Link to post Share on other sites
cjl2010 Report post Posted August 5, 2019 Where are you located? Share this post Link to post Share on other sites
cjl2010 Report post Posted August 6, 2019 5 hours ago, elwood said: NW Tucson If you don’t find anyone local, mail me your brass and I’ll do what I can to help you out. Share this post Link to post Share on other sites
elwood Report post Posted August 6, 2019 Appreciate that! It would also give me an excuse to head up there and see some old friends. Worked for Payson hotshots in the mid 90's..... -Eliot Share this post Link to post Share on other sites
cjl2010 Report post Posted August 6, 2019 7 minutes ago, elwood said: Appreciate that! It would also give me an excuse to head up there and see some old friends. Worked for Payson hotshots in the mid 90's..... -Eliot Those are some tough dudes! Let me know. Share this post Link to post Share on other sites
MULEPACKHUNTER Report post Posted August 6, 2019 What's the length on the case? Share this post Link to post Share on other sites
cjl2010 Report post Posted August 6, 2019 1.403 according to google 1 Share this post Link to post Share on other sites
elwood Report post Posted August 6, 2019 That is correct for max length. Mine are actually trimmed down to about 1.395. Share this post Link to post Share on other sites
cjl2010 Report post Posted August 6, 2019 Let me know if you need me to give it a shot. I use an annealeez and it should be able to handle them Share this post Link to post Share on other sites
elwood Report post Posted August 6, 2019 Thank you very much. Im going to check with a couple local folks tomorrow and will let you know. 1 Share this post Link to post Share on other sites
lancetkenyon Report post Posted August 6, 2019 I can knock them out too, if you mail them to me. North central Phoenix area. Share this post Link to post Share on other sites
cjl2010 Report post Posted August 6, 2019 Spent some time googling the 22 K hornet. pretty sweet cartridge. What do you use your rifle for? Share this post Link to post Share on other sites
MULEPACKHUNTER Report post Posted August 6, 2019 My machine will work as well if needed. Share this post Link to post Share on other sites
elwood Report post Posted August 6, 2019 Thank you both very much. I ended up finding a co worker with the same machine cjl has and we are going to give it a try down here. I'm trying to find a fur friendly round for 20-200 yds on fox, bobcats and coyotes.... Not sure if it exists but I'm gonna give it a try this year. If not K Hornet, I might try a 19 Badger or 20 Vartarg next winter. 1 Share this post Link to post Share on other sites
