Lets See your Loading Bench

[akuritone]

Here is my relaoding bench. Was simple to build but a pain to get it in the closet assembled. Works great and allows me to be as clutter free as possible.

 

 

And here is why my wife likes it.....

 

 

 

I used one of these which is probably unnecessary but it sure made it easy. I also put laminate on the top so it would be easy to clean.

 

http://www.sportsmansguide.com/net/cb/cb.aspx?a=207081

 

Works good for me..

 

Jeff

[elpepe25]

dude that is slick, good idea

[GameHauler]

Right on Jeff

I love it But where is the hammer for resizing:

[BowNut]

No I don't drink the Bacardi that is on the bench while I reload!!!!! That bottle is about 2 years old I forgot it was in there until I saw it in the pic.

 

 

Your just missing a can of Cope and you'd be the Real ATF!!!!

 

 

Hey how did you know I was a Cope guy!!! I bet if I dig out the trash can from under the bench there are a couple empty Cope cans in there.

[billrquimby]

"Was simple to build but a pain to get it in the closet assembled. "

 

I give up. How DID you get it in that little closet?

 

Bill Quimby

[jeffcros]

This is my first time posting anything, There are some nice benches on here thought I would show mine.

[Huntn coues]

Welcome to the site Jeffcros.

[GameHauler]

Welcome Jeffcros and thanks for sharing.

Yours is the only bench I have seen made out of metal.

Is there a reason no one has used metal other than not being a weldor?

Thanks everyone else also for some good ideas. keep them coming.

[firstcoueswas80]

Metal is a pain to make! gotta cut it. sane the edged, weld it yada yada yada. wood is much easier.

[GameHauler]

Metal is a pain to make! gotta cut it. sane the edged, weld it yada yada yada. wood is much easier.

 

 

Not when your AWS certified

Pipe and plate since 1980

[firstcoueswas80]

Mike, the last sentence still holds true.

 

How ever, metal is very strong, and you dont have to worry about the wood breaking!

[GameHauler]

Mike, the last sentence still holds true.

 

How ever, metal is very strong, and you dont have to worry about the wood breaking!

 

 

So,

There is no reason not to use metal if I wish?

I already have an extra metal bench apx. 30"X60".

Was thinking about putting a Sheet of Plywood

on it and coating it with poly urethane.

[firstcoueswas80]

No advntage other than thats what ya want. like i said, you dont have to worry about breaking the metal when you crank on the press when re-sizing the brass like you do with wood.

[Buckhunter]

Heres my relaoding bech , still in the works.

[Coues 'n' Sheep]

Heres my relaoding bech , still in the works.

 

Is that a "your #1" flying on that middle shelf????