SouthernCouesHunter Report post Posted February 6, 2008 Can anyone tell me if any of the binocular adapters in the CW store fit on Burris Signature Series 12x50 Binoculars. I would like to mount them to the Slik Sprint PRO Tripod with some sort of panning head. I am not sure if I will go with the Jim White one or not. Any help would be greatly appreciated. Share this post Link to post Share on other sites
CouesWhitetail Report post Posted February 6, 2008 See if the cap on the hinge between the barrels (end farthest from your eyes) unscrews to reveal a 1/4" threaded hole. If so, then yes, the front mount adapter should work fine. Sometimes the cap on binoculars is not easy to unscrew. You can also probably call the company you bought them from and ask if the cap unscrews or call the manufacturer. I briefly looked online and didn't see where it said the cap would unscrew. If you don't have a threaded hole in the front, then you can use the velcro adapter on it (it's on the CW.com adapter page). That's what I use on my zeiss 10's because it doesn't have a threaded hole. Amanda Share this post Link to post Share on other sites
SouthernCouesHunter Report post Posted February 6, 2008 Thanks Amanda. I do know that the cap unscrews and the the screw is 1/4" but I am not sure if the Swaro Adapter is skinny enough to fit between the barrels. Have any idea how wide the Swaro Adapter is? Share this post Link to post Share on other sites
CouesWhitetail Report post Posted February 6, 2008 If you mean the swaro adapter that Jim White makes, then there are two versions of it. One is taller and should allow your barrels to close together. The post is about 1/4 inch wide at the part between the barrels. For my swaro 15s the barrels close completely because there is a little indentation there where the post is. You can always order one and try and and see. If it doesn't work for your binos, you can send it back for a refund. Amanda Share this post Link to post Share on other sites
