Barnesboy Report post Posted April 10, 2018 Hello guys and gals, am looking for a good muzzle brake for my 6.5 Creedmoor. The kick doesnt bother me but my wife will be using it this year if she draws her first deer tag. Fingers are crossed for that. Share this post Link to post Share on other sites
bustedknuckleinc Report post Posted April 10, 2018 https://www.americanprecisionarms.com/products/gen-2-little-bastard-muzzle-brake?variant=2033631199242 I used this one on my RPR in 6.5. Then upgrade to a Silencerco Harvester. 1 Share this post Link to post Share on other sites
cactusjack Report post Posted April 10, 2018 is the barrel threaded already? If not, take it to someone and have them cut it as if you were going to suppress it. That gives you the option of suppressing it later. And what thread pitch to use depends on the barrel profile. 1/2 x28 is probably what I would use. My 6.5Cm Adirondack came threaded in 7/16x28. Silerncerco has that for the can I'm running. The same one my daughter used to kill her cow last fall. https://www.store.silencerco.com/products/saker-trifecta-muzzle-brake?variant=1101311800 Share this post Link to post Share on other sites
Barnesboy Report post Posted April 10, 2018 It's a Thompson Center T/C Compass and the barrel was already threaded. I'll have to look in the manual to see if it tells me what the threads are. Share this post Link to post Share on other sites
cactusjack Report post Posted April 10, 2018 Unless it was custom done, it should be 1/2x28 Share this post Link to post Share on other sites
ALYUAZ Report post Posted April 10, 2018 +1 for American Precision. I would opt for Gen 2 Little Bastard muzzle break. http://precisionrifleblog.com/2015/08/21/muzzle-brake-summary-of-field-test-results/ https://www.americanprecisionarms.com/products/gen-2-little-bastard-muzzle-brake?variant=2033631199242 I used this one on my RPR in 6.5. Then upgrade to a Silencerco Harvester. Share this post Link to post Share on other sites
bigj23 Report post Posted April 10, 2018 I used the Ruger threaded muzzle break and it did great for the same gun. Share this post Link to post Share on other sites
429mike Report post Posted April 10, 2018 It should be a 5/8x24 thread pitch and you should be able to run any self timing brake that you like on there! Share this post Link to post Share on other sites
PseAZ Report post Posted April 11, 2018 Interesting read, thanks for sharing also debating getting one for my wife's 6.5 Share this post Link to post Share on other sites
cactusjack Report post Posted April 11, 2018 I gotta know, what thread pitch is it? Who wins the battle of the pitch? Share this post Link to post Share on other sites
bigj23 Report post Posted April 11, 2018 It is a 5/8x24. I have the same gun. Share this post Link to post Share on other sites
Barnesboy Report post Posted April 12, 2018 Sorry guys been busy with work but everyone that said 5/8×24 is right. Thank you everyone for the info as well Am gonna check out some of these websites you mentioned. Thank you again 1 Share this post Link to post Share on other sites
