PowellSixO Report post Posted April 4, 2018 Anyone have a set of Go No Go Gauges, for a 7mm Rem Mag, that they'd be willing to rent to me for a couple days? If so please let me know. I'm re-barreling my savage with a new x-caliber barrel, and need a set of headspace gauges to install it. I have the wrenches and barrel vice, but need the gauges still. I'd prefer to rent them from someone if possible, but will purchase them if I have to. Thanks. PM me or text me at 435-668-9597 Jake Share this post Link to post Share on other sites
nateNAU Report post Posted April 5, 2018 If you can't find them there are ways around using the gauges. Any factory round will serve as a go gauge and a no go is pretty simple to make. After over 15 years as a gunsmith and thousands of rifles built I've never touched go/ no go gauges except for one or two of the Ackley improved cartridges, which have some special rules when chambering. 2 Share this post Link to post Share on other sites
PowellSixO Report post Posted April 5, 2018 If you can't find them there are ways around using the gauges. Any factory round will serve as a go gauge and a no go is pretty simple to make. After over 15 years as a gunsmith and thousands of rifles built I've never touched go/ no go gauges except for one or two of the Ackley improved cartridges, which have some special rules when chambering. Thanks. I'll look into that. Share this post Link to post Share on other sites
PowellSixO Report post Posted April 5, 2018 I found a place online that rents the gauges. If anyone else needs this in the future, here is a website that rents them. http://www.reamerrentals.com/default.asp Share this post Link to post Share on other sites
