Jump to content
Sign in to follow this  
Passinthru

Electrical Work for Mechanical Work

Recommended Posts

Just start with the easy stuff first. Check vacuum lines and adjust and clean the carb. You can spray carb cleaner around vacuum lines and carb base with it running if you spray something with vaccum and the idle raises there's your problem. Then go further and check plugs and wires

Share this post


Link to post
Share on other sites

Just start with the easy stuff first. Check vacuum lines and adjust and clean the carb. You can spray carb cleaner around vacuum lines and carb base with it running if you spray something with vaccum and the idle raises there's your problem. Then go further and check plugs and wires

Share this post


Link to post
Share on other sites

Thanks for the info may try and tear into him tomorrow. Already replaced fuel pump, fuel filter, and plugs and wires. Have to use ether or something else flammable to get him going now as he sits

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×