PRDATR Report post Posted March 10, 2018 Suggestions Share this post Link to post Share on other sites
Snapshot Report post Posted March 10, 2018 You can cover the ugly spot if you can find a jumbo sized overflow cover. It won't seal because the part of the tub that it seals against is gone. Any water that goes through the overflow slot in the cover would leak under the tub. Might have to get creative and use a jumbo cover, a couple of gaskets, and a little silicone? You can also get a blank cover to eliminate the use of the overflow. As far as the cosmetics, there are companies that can refinish the surface, or you can buy a small bottle of touch up paint for fixing bathtub/sink chips. Share this post Link to post Share on other sites
AZbowhntr Report post Posted March 10, 2018 I have a buddy that could probably fix it. He would cut out all the rusted area and patch and refinish. I have referred him to people I have done home inspections for and they are always pleased. Not sure if there is a limit on the amount of damage though. Share this post Link to post Share on other sites
CatfishKev Report post Posted March 10, 2018 There are company's that reglaze tubs but it must be done correctly. I've heard even when done right it chips and flakes anyways. Share this post Link to post Share on other sites
