missedagain Report post Posted February 15, 2018 Last year I put a peep sight on my Omega but couldn't get the right height to line up with the front sight, after some googling I found someone else had the same problem and had a spacer made to mount the sight on. So I am looking for a machinist that can make something like this or if someone has some other ideas of how I can mount this that would be great. Share this post Link to post Share on other sites
hunter4life Report post Posted February 16, 2018 I put one on an Omega and ended up going with the Williams FP receiver sight. I ran into the same problem with the WGRS sight that you are having. I think the FP sight is better built anyways. I did have to sand away a small area of the stock to make it fit right. https://www.midwayusa.com/product/115737/williams-fp-t-c-receiver-peep-sight-encore-g2-omega-scout-aluminum-matte 1 Share this post Link to post Share on other sites
missedagain Report post Posted February 17, 2018 Probably cheaper to buy that sight with more range also. Thanks Share this post Link to post Share on other sites
