Rock30golf Report post Posted October 2, 2017 WELL I think I got it figured out. This baby just dont like the eld or the sst hornaday bullets. For shits and giggles I bought some barnes vor-tx 160 grain TSX_BT And now i am gettin 1.5 inch groups at 200 yards with no crazy flyers. Thank you everone for your help and suggestions. Share this post Link to post Share on other sites
lancetkenyon Report post Posted October 2, 2017 Try some Bergers.... 2 Share this post Link to post Share on other sites
L Cazador Report post Posted October 3, 2017 WELL I think I got it figured out. This baby just dont like the eld or the sst hornaday bullets. For shits and giggles I bought some barnes vor-tx 160 grain TSX_BT And now i am gettin 1.5 inch groups at 200 yards with no crazy flyers. Thank you everone for your help and suggestions.In my 50 plus years of shooting and reloading I've never seen a change of bullets make such a change. I'd say you still have the problem. I recently had such an incident. I found that the base screws were too long. You could tighten them down and they would come loose after a few shots. The two screws on the front can be a problem because they can bottom out on the barrel threads. Tighten the front screw on the front base first and see if the base is tight. Do not install the other three screws if it's a one piece base. With the front screw only holding the base check to see if the base will move. Then back the screw out and check if the bottom of the screw is shiny. 1 Share this post Link to post Share on other sites
Big or Bust Report post Posted October 3, 2017 Yeah... Switching bullets isn't going to make that change alone.... Share this post Link to post Share on other sites
