Curtis Reed Report post Posted July 28, 2017 grab a cluster from a pick a part. Share this post Link to post Share on other sites
Tac Report post Posted July 28, 2017 The use steeper motors for those gauges they are inexpensive and there are lots of people who fix them. As for the reduced power problems the othe guy is having we had one traced down to wiring or throttle control and customer sold truck. That was a common problem on those trucks Share this post Link to post Share on other sites
ctafoya Report post Posted July 28, 2017 Same thing happened with mine, then all the gauges did their own thing. Started having lots of other issues after that. Share this post Link to post Share on other sites
Gunit Report post Posted July 28, 2017 I had a 2004 and a 2005 both had this issue. There are guys that do a mobile repair for this service, it costs about $300 to do the whole gauge panel (recommended) or $125 per gauge. Share this post Link to post Share on other sites
trphyhntr Report post Posted July 28, 2017 The rest of the gauges will follow. Its the cluster. Prob close to a.grand to have it done you got ripped brother. Share this post Link to post Share on other sites
trphyhntr Report post Posted July 28, 2017 you can go to dicks speedo in tempe or you can call ASAP speedo. Share this post Link to post Share on other sites
elecshoc Report post Posted July 28, 2017 7 dollar motor and a 5 min solder will fix it up. Share this post Link to post Share on other sites
TexasHunter Report post Posted July 29, 2017 if your in tucson and can take it out yourself take it to tjs speedometer or if you have all the right tools you can order the motors on line and solder them into the board it is not really expensive I have had tons of those rebuilt and tjs does a great job 1 Share this post Link to post Share on other sites
az41mag Report post Posted July 29, 2017 Another vote for Dick's speedo. My 03 did the same thing several years back. They re-soldered some connections on the cluster and has been good since. Turn around time was less than an hour. 1 Share this post Link to post Share on other sites
muledeerarea33? Report post Posted July 29, 2017 if your in tucson and can take it out yourself take it to tjs speedometer or if you have all the right tools you can order the motors on line and solder them into the board it is not really expensive I have had tons of those rebuilt and tjs does a great job that's the place I couldn't remember the name. Share this post Link to post Share on other sites
Heat Report post Posted July 29, 2017 Same year make and model and I am on my third after two warranty replacements. This one has done pretty well but is starting to go too. Lights on the heater temp area are going. Driver side is out. 178K miles. Share this post Link to post Share on other sites
Whitesheep Report post Posted August 26, 2017 What? No jokes about not buying a Gov't Motors truck in the 1st place? Wow, this place isn't what it used to be. Share this post Link to post Share on other sites
trphyhntr Report post Posted August 27, 2017 What? No jokes about not buying a Gov't Motors truck in the 1st place? Wow, this place isn't what it used to be. Was unaware there was a bailout in 2004 Share this post Link to post Share on other sites
