Zeke-BE Report post Posted July 14, 2017 Not sure if this is a common practice, but I went ahead and took my widest spread of variation of my load development to test it out. Just in case you slipped up or put the wrong brass weight in the wrong pile and see what it does to your most common grouping. So here is the widest spread I have after I weighed everything. 1--shot--ELDx 143.4 g-----H1000 60.6 g------Brass 178.2 2nd--shot--ELDx 142.9------H1000 60.5-----Brass 177.3 (this will be 80% of my loads) 3rd--shot-- ELDx 142.2----H1000 60.2-----Brass 176.6 200 yards little under 1.8 inch. Most of my shots are usually .8"- 1.5" at 200 yards. So even with this variations Im still getting sub MOA My node for this load is a pretty good spread. Velocity from 60-60.8 grains is roughly 15fps variations. My OAL will show up a little more, but brass weight and bullet weight with powder is does pretty good. 2 Share this post Link to post Share on other sites
lancetkenyon Report post Posted July 15, 2017 Love those long necks. 1 Share this post Link to post Share on other sites
