Jump to content
Sign in to follow this  
bigandy

ISO tikka t3 6.5x55

Recommended Posts

I had to order mine from Whittaker Guns. They had a few both R and L hand, and also the best prices. Budd's Gunshop also had some.

 

forepaw

Share this post


Link to post
Share on other sites

Eurooptics still has them at blow out price. Wood stock. I bought a 243 from them great transaction

Share this post


Link to post
Share on other sites

Stainless action and barrel will not be a problem. The finish on Tikka's is very low glare, almost a bead-blast finish. You can always cover with some camo tape. The worst glare comes from the polished bolt handle, which does not to be covered or painted.

 

forepaw

Share this post


Link to post
Share on other sites

I think that one is a Super-lite as it has the fluted barrel. Those were about $100 more than the regular T3 lite.

Share this post


Link to post
Share on other sites

It is pretty easy to figure out if you go to the Tikka home page. The improvements are listed. Mostly they are variants (or the same) as the after-market parts offered by Mountain Tactical of Bozeman, MT www.tikkaperformance.com.

 

At one time I knew all the upgrades that comprised the T3x, and thought about the advantages over the T3, if any. To me, they are mostly sales-appeal oriented, and almost but not quite, cosmetic. The interchangeable grip panels struck me as being just goofy. The stainless bedding lug sounds nice, I doubt if it offers much over the hard aluminum lug. The enlarged ejection port will make it easier to reach in and fiddle with cartridges, clean the chamber and throat, etc. I still don't think you can load into the detachable mag. from the ejection port, and this is a drawback of the design, though a minor one, as spare mags are easily carried.. The steel bolt shroud is also sort of a nice to have cosmetic item. There is nothing wrong with the high-impact plastic shroud, but folks like steel stuff which I can understand. The receiver scope mounting holes have been beefed up and this is probably a good thing, with the huge scopes that get mounted on lightweight rifles, but I have never had a bit of problem with the scope mounts on the two T3s I own. The improved molded "checkering" might be a slight improvement, or it might not. The hollow stock has apparently been filled with sound-deadening foam, which I did to my T3 as soon as I got it, and it helps a lot. Last but not least, Tikka claims to have a new, improved recoil pad on the T3x. This is no doubt an improvement, as the best thing to do with the factory pad is take it off and throw it away, and buy a pull-on Limbsaver pad. The small pad fits great and works well, and shortens the stock so that it is most useful when you have a jacket on and are wearing a pack - which you would expect to do with a rifle primarily intended for rough country and mountain hunting.

 

That's about all I can offer. I haven't owned or shot a T3x and don't have any frame of reference for how much better they handle or shoot. Probably they are no worse than the T3, and if they are better, then I would expect them to shoot very respectably. Whichever you end up with, you should consider changing the OEM trigger spring for a Yo-Dave kit. It will improve the trigger, which is already pretty decent.

 

forepaw

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×