Pac8541 Report post Posted February 13, 2017 Not at all related to hunting gear but since we're all a local "family:" Low pinion out of a 76 Ford, set up for a spring over YJ (welded on spring perches). 8 lug with 5.86 gears and a lockrite locker. Dif guard. High steer arm installed and with drag link and tie rod included. This is a full width HD axle so it measures just over 69" WMS and has thicker walled tubes than a standard D44. Not sure what the spline count is on the shafts. Bought used and never installed. May be able to assist with delivery but pick up is definitely preferred as my options are limited. I've got an engine hoist so getting it on a trailer would be easy. Hoping to sell as soon as possible and serious offers will be strongly considered. I realize this isn't the highly sought after high pinion version and it ain't a 60 but for most stuff where you're not crawling waterfalls, I'm fairly certain this will get things done. If it were narrower, I'd be installing it myself but I don't want to go through the work to cut it down. Thanks for looking. $500 obo Share this post Link to post Share on other sites
