sherman Report post Posted September 13, 2016 Have you ever done mossy oak bottom land pattern Share this post Link to post Share on other sites
lancetkenyon Report post Posted May 28, 2017 Here is a 10/22 stock I have started on. Still have to do the flat black patches after the flat OD dries. This is one of mine for a test stock for a Savage stock. Spots will be smaller, more like the black spots, and more evenly distributed. 2 Share this post Link to post Share on other sites
Zeke-BE Report post Posted May 28, 2017 Cool pain job!! Even cooler that you have lockers for your ammo and a picture frame of groupings Share this post Link to post Share on other sites
lancetkenyon Report post Posted May 28, 2017 Cool pain job!! Even cooler that you have lockers for your ammo and a picture frame of groupings All of those targets are Taylor's groups, and most are at 200 yards. 1 Share this post Link to post Share on other sites
300RUM Report post Posted May 29, 2017 You are the Rembrandt of rifle stocks. An awesome post and beautiful work. After I fire the last box of shells and pull my .308 apart to re-barrel I am also going to lengthen the stock. I was thinking of trying a cammo pattern. It would keep me amused while I wait for the new barrel. A pattern is something I have never tried before. The stocks and actions I have painted have all been a single color. Lots of great pattern ideas here. When you mask over the checkered areas on the stock how do you ensure a good seal? Use a stiff brush to get the masking to conform to the checkering? If a rifle is not behaving does its ammo get a bottom locker? Share this post Link to post Share on other sites
lancetkenyon Report post Posted May 29, 2017 When I mask a checkered area, I run my fingernail in all of the lines to get a good seal. The top 4 rows are my ammo and reloading stuff, bottom 2 rows are knives, maps, rests, chrome, etc. Plus some of my son-in-law's ammo. Share this post Link to post Share on other sites
lancetkenyon Report post Posted May 29, 2017 Per request, smaller sponge patterns in progress. 2 Share this post Link to post Share on other sites
firstcoueswas80 Report post Posted May 29, 2017 Lance, I'm usually not a giant fan of painted stocks but I really like that one. Share this post Link to post Share on other sites
Zeke-BE Report post Posted May 29, 2017 My brother in law has painted a couple of his guns. But when I handle it I can always tell its painted by just by touch. (like a ever so slightly humid stick touch) Does your paint do that? If not is it just the paint he had? Share this post Link to post Share on other sites
lancetkenyon Report post Posted May 29, 2017 Mine don't feel sticky at all. I have several of my own that I have painted. Share this post Link to post Share on other sites
Douglas-gun-guy Report post Posted May 29, 2017 My brother in law has painted a couple of his guns. But when I handle it I can always tell its painted by just by touch. (like a ever so slightly humid stick touch) Does your paint do that? If not is it just the paint he had? Lance's stocks aren't sticky at all. He's done 3 for me and they're all awesome! 1 Share this post Link to post Share on other sites
AZbowhntr Report post Posted May 29, 2017 I really like it too. Especially since it is my stock. Can't wait to get my hands on it. Awesome job as always Lance. 2 Share this post Link to post Share on other sites
lancetkenyon Report post Posted May 29, 2017 Clear coats on and drying. 1 Share this post Link to post Share on other sites
300RUM Report post Posted May 30, 2017 There is a product I have used that kind of fits in with this subject. Brownell's sells something they call spray grit. It is basically small pieces of silica mixed in an aerosol adhesive. I used a High Tech Specialties stock on a build and wanted a more textured surface where my hands went. I used the spray grit then painted the stock, I was lazy it is all one color. This was about 6 years ago and the grit has held up well. I recall the adhesive being fairly clear so it might be possible to use it over an already finished surface. Share this post Link to post Share on other sites
IA Born Report post Posted June 2, 2017 I'm just now catching this thread and all I can say is WOW! How much do you charge for that? I just PMd you about a rifle (loading) and now you got me asking myself how much trouble I can get in with my lovely wife! Share this post Link to post Share on other sites