hoghntr Report post Posted February 13, 2016 I may have already asked. I need a piece of glass 24 5/8 x 36 beveled edge, tempered, rounded corners etc for coffee table. Yep i have table that is oh so close to normal aize. But NOT IF ANYONE WORKS AT A GLASS SHOP PLEASE LET ME kNOW HOW MUCH $$$ clear or smoked glass 6024994136 Share this post Link to post Share on other sites
Norteno Report post Posted February 14, 2016 I got mine done which was a pretty complex shape at D&L Chandler glass works. I shopped around and they were the best deal and did great work. 1 Share this post Link to post Share on other sites
ready2hunt Report post Posted February 14, 2016 I've got glass cut at ACE hardware in the past. Never asked for beveled though. Worth a shot to ask. They were pretty cheap. Share this post Link to post Share on other sites
Richie Report post Posted February 14, 2016 I do ornamental iron....fabricate lots iron doors and am ordering glass often from my vendor. Obviously the glass I order is insulated and way thicker then what your looking for but I don't think there are any limits to size shape and finish. I draw the shape I want in autocad and send it over. If your serious about it send me a pm. Thanks Share this post Link to post Share on other sites
hoghntr Report post Posted February 14, 2016 Problem is standard glass you can get anywhere is 24x36. Dont think i will be setting my plate down so hard ever again! I just found a place that will do a custom piece for $163 and i might just orde Share this post Link to post Share on other sites
