rcdinaz Report post Posted August 25, 2015 This is the pricing from the site but they have some stuff there like the big pig target that are not on the site. They also had squares instead of round. Buy some of these which are really slick as well: http://www.amazon.com/The-Last-Stand-Target/dp/B00JVX4JB8 If you have someone who can weld you can make some out of round tube for cheap as well. Gong Style Targets: 4” Round x 3/8”Thick $10.99 6” Round x 3/8” Thick $15.99 6” Round x 1/2” Thick $23.99 8” Round x 3/8” Thick $21.99 10” Round x 3/8” Thick $35.99 10” Round x 1/2” Thick $46.99 IPSC Style Targets: 18” W x 26” H x 1/2” Thick $111.99 Share this post Link to post Share on other sites
bowhnt Report post Posted August 25, 2015 10" x 3/8" round $35.99 Share this post Link to post Share on other sites
Camofreak Report post Posted August 25, 2015 Sweet thanks for the info guys. i like that holder you posted up Rich, that thing was slick. I can weld, so i might just make my own, but those are a good option. Share this post Link to post Share on other sites
rcdinaz Report post Posted August 26, 2015 I have some made of aluminum tube I bought, let me know if you want me to dig them up and post a pic. I think conduit with 2 pcs ~ 100 deg off a center point is the measurement, those two pcs are at ~90 from each other. You want the legs to lean away from the target so they are as far out of range as possible but still hold the weight. We shot one leg off one weekend, bullets go through rebar like butter. I made some out of aluminum tube which was awesome to carry but got expensive on misses! 1 Share this post Link to post Share on other sites
ctracingraptor Report post Posted September 1, 2015 I bought all of mine local, ive had no problems with issues. Can also make custom order to size. I really love my 30" plate, and it really sucks draggin it around the desert ha ha. Pm me for more info Share this post Link to post Share on other sites
.270 Report post Posted September 1, 2015 this is the kinda gongs you guys need. Lark https://www.youtube.com/watch?v=Z75CTvDnqtA Share this post Link to post Share on other sites
Whitesheep Report post Posted September 8, 2015 Nice stand Bowhnt, but I would like a little longer chain. The commercial Caldwell 10" is actually pretty nice for the $. Mine has taken multiple .340 Wby's at 300 yards with no problem, but it does tend to knock the gong off the chains once in a while so that is why I suggest you might want them longer to soak up a little more power. Gongs are so much fun everyone should have several! For my next gong I am going to check out Industrial Metal as I have been ordering mine from http://shootsteel.com/ with free shipping on special days. You can even get blemish gongs from them although I am not really sure what that means other than a lower price. Share this post Link to post Share on other sites
Viper Report post Posted September 8, 2015 I've had the chain take hits and break. I use convair belt wrapped over the top bar and bolted to the plate. It can take hundreds of hits. Share this post Link to post Share on other sites
5alivefishing Report post Posted September 26, 2015 Viper, I have been looking for conveyer belt. Where did you find a piece. Thanks Tim Share this post Link to post Share on other sites
Ernesto C Report post Posted September 26, 2015 Tim, are there any factories or packing/industrial plants where you live? you can ask there. Or if you come by Yuma I can get you some. Ernesto C. Share this post Link to post Share on other sites
5alivefishing Report post Posted September 26, 2015 thank you,, Share this post Link to post Share on other sites
oz31p Report post Posted September 26, 2015 Tim, are there any factories or packing/industrial plants where you live? you can ask there. Or if you come by Yuma I can get you some. Ernesto C. Rock quarry/ crushing operations always have used/ discarded conveyor belt I've had cutting edge supply on 27th and McDowell cut them for me for free out of scrap ar500 Share this post Link to post Share on other sites
Norteno Report post Posted September 26, 2015 I just ate at San Tan Flats and there was a guy out front selling gongs. Pretty big selection looked like. Share this post Link to post Share on other sites
Viper Report post Posted September 27, 2015 Viper, I have been looking for conveyer belt. Where did you find a piece. Thanks Tim My buddy got it...not sure. Share this post Link to post Share on other sites
