willhunt4coues Report post Posted June 22, 2015 wow where to start. I use the Lyman prep center for un precision calibers 22-250 bla bla bla. Works great and is fast. I use a Thumbler model B for stainless tumbling http://www.stainlesstumblingmedia.com/reloading-products/tumblers/thumler-s-tumbler-model-b-high-speed.html I use a LE Wilson case trimmer http://www.midwayusa.com/product/276092/le-wilson-micrometer-case-trimmer-stainless-steel-case-trimming-kit?cm_mmc=pf_ci_google-_-pf_ci_google-_-pf_ci_google-_-pf_ci_google&gclid=CJaXq5iGpMYCFdcVgQod6PsB8Q I use the (VERY GOOD TOOL TO HAVE) K&M chamfering tool for precision work https://www.kmshooting.com/catalog/case-neck-chamfer-tools/controlled-depth-tapered-reamer_large_6mm-338.html I use the (VERY GOOD TOOL TO HAVE) Sinclair Primer pocket tool with the driver adapter for my drill http://www.sinclairintl.com/reloading-equipment/case-preparation/primer-pocket-tools/handles/sinclair-primer-pocket-uniformers-prod34720.aspx I use a Ballistics edge annealer for annealing http://www.annealingmachines.com/model-400.html I use a Harrells press http://harrellsprec.com/index.php/products/compact-reloading-press I use a Hornady concentricity tool http://www.hornady.com/store/Ammunition-Concentricity-Tool/ I use a Redding Concentricity guage for cases http://www.midwayusa.com/product/311160/redding-case-neck-concentricity-gage I use a RCBS Chargemaster 1500 for fast throws http://www.midwayusa.com/product/772151/rcbs-chargemaster-1500-powder-scale-and-dispenser-combo-110-volt I use a Sartorius ENTRIS323-1S for double weighing (getting the weight to .02 precision) http://balance.balances.com/scales/662 I use a 21st century SS priming tool for precise primer seating depth http://www.21stcenturyshooting.com/S.S_FQUY.php I use the Hornady digital calipers (have about 4 sets) 1 for the headspace measurement, 1 for hornady comparator CBTO, 2 for regular measurements Lyman flash hole uniformer http://www.sinclairintl.com/reloading-equipment/case-preparation/flash-hole-deburring-tools/lyman-flash-hole-uniformer-prod44714.aspx Sinclair flashhole reamer (get the .081 for bigger flashholes and .0625 for small) http://www.sinclairintl.com/reloading-equipment/case-preparation/flash-hole-deburring-tools/sinclair-flashhole-reamer-0625-prod36020.aspx If I think of anything else I will put it up. Most of these items I use are for precision work. I can get by without using half for my 22-250. 1 Share this post Link to post Share on other sites
apache12 Report post Posted June 23, 2015 Seems like most people use tumblers instead of sonic cleaners. I thought maybe the sonic would clean the inside of the brass better but maybe that's not needed? Share this post Link to post Share on other sites
5guyshunting Report post Posted June 23, 2015 The walnut media goes all through them. I use a compressor to blow everything out. Share this post Link to post Share on other sites
willhunt4coues Report post Posted June 23, 2015 I have tried 3 sonic cleaners and all suck IMO. Then of course vibratory tumblers with walnut and corn do a good job polishing but does not get the inside clean. The STAINLESS steel tumbling will do both the stainless steel pins clean everything out. Your brass will be brand new when done. After I stainless tumble I then anneal and throw back into the same tumbler but with corn cob to polish. Classes have stayed clean with no tarnishing up to 1 year. 1 Share this post Link to post Share on other sites
willhunt4coues Report post Posted June 23, 2015 Everyone I going to stainless tumbling. Google it and watch some videos. With only 100 pieces of brass they will be done in 1 to 2 hours. Share this post Link to post Share on other sites
DesertBull Report post Posted June 23, 2015 I got a tumbler from harbor freight. With the 20% coupon it was like $30. Works fine. 1 Share this post Link to post Share on other sites
willhunt4coues Report post Posted June 23, 2015 I had the same one at first but they just dont last. As much as I was tumbling the little cans were great for like 20 or so cases. But you are correct Desertbull it does work. You will still have to buy stainless pins. You could make your own tumbler. Heck I have even seen 50 gal tumblers...LOL Share this post Link to post Share on other sites
HICAP40 Report post Posted June 24, 2015 I load probably more than most people, here what works for me DIllon tools and reloaders rock for reloading lotsa bullets, and there in Phoenix Most single stages will do the trick, I use a forester for accuracy/ long range I use wilson trimmers, but now they have little crow trimmers which look real promising. build the stoutest bench you can. and redding dies you cant go wrong with oh, and frankford arsenal stainless tumblers rock!!!!!!!!!!!!!!!!!!! start simple and learn, hang at the bench rest competitions and ask questions. Those guys are all about accuracy johnny Share this post Link to post Share on other sites
rcdinaz Report post Posted June 24, 2015 I posted some info on my setup at this link a few months back. http://www.coueswhitetail.com/forums/topic/57336-i-want-to-reload-i-need-advice/ Will hunt for Coues has a great list as a starting point. I agree stainless is the only way to go on the brass cleaning. I bought the HF tumbler with 2 cans and it does great and was a steal with the coupon. We need a sticky on this! What is required to get started and then recommendations and reviews on tools. 1 Share this post Link to post Share on other sites
Kingzero Report post Posted June 27, 2015 Reloading is fun but can be tedious, especially if precision is your goal. I have a lot of $ invested in my setup and could easily spend another 1500 right away to make my life easier. Everyone starts somewhere and attention to detail is paramount. The kit you picked up will serve you well for a long time. Hornady makes good stuff and has good customer service. The first things would be a good case trimmer, vibratory cleaner and calipers. I prefer dial calipers and have a nice Starret set. Stainless tumbling is definitely the way to go when you are ready. If you are somewhat handy you can build one and have something stronger than the ones on the market. I built my own after looking at my buddies cheap Thumblers model B. What cartridges are you starting out with? Share this post Link to post Share on other sites
apache12 Report post Posted June 28, 2015 So I built my table today. Nice and sturdy. I'm sitting in front trying to figure where to mount my powder measure so the process flows. I will mount the press on the corner so it's stable I think I will get a stand for the powder measure I'm going to load 243 7mm-08 270 and 30-06 so far. Maybe some .45 I think from what I've read I will neck size mostly so the head space is tighter and then less trimming Need calipers and a tumbler I hear a tool for measuring where the rifle threads start is helpful too The hornady book was awesome to read Share this post Link to post Share on other sites
Kingzero Report post Posted June 28, 2015 An overall length gauge is what you are talking about and it will let you know how long your chamber is so you can seat your bullets accordingly. You can make one easy.....just take a case that has been fired in the rifle and screw your sizing die down to where it sizes the neck just enough to hold a bullet. You want the bullet to slide in and out somewhat easily but have enough tension to keep it in place. Slide the bullet in the case and leave it long, then stick it in your chamber and close the bolt. Eject the case being careful not to move the bullet.....measure and record. It takes some trial and error to get the right tension right but it's free. Check multiple times until you get consistent readings. Share this post Link to post Share on other sites
apache12 Report post Posted June 28, 2015 Thanks for that! Share this post Link to post Share on other sites
