Ed67 Report post Posted April 5, 2015 Can anyone offer suggestions on loads for the 270wsm? Bullet, powder, primer. I shoot a Remington 700. With factory loads my gun likes the 140 gr accubonds. Thx. Share this post Link to post Share on other sites
firstcoueswas80 Report post Posted April 5, 2015 140 accubond, federal gmm215 and work up to 62ish grains h4831sc. Share this post Link to post Share on other sites
Ed67 Report post Posted April 5, 2015 Thank you, I have the powder and will try it out. Share this post Link to post Share on other sites
Coach Report post Posted April 5, 2015 IMR 4350 or h 4350 if the h4831 doesn't work Share this post Link to post Share on other sites
huntwithme2 Report post Posted April 5, 2015 i shoot 140 accubounds, 60.5 grns of rl-22 and wlmr primers out of a tikka lft handed 270 wsm Share this post Link to post Share on other sites
Ed67 Report post Posted April 5, 2015 Many thanks to all of you. I figured its time to start reloading this caliber since I've accumulated about 220 pieces of brass and my son bought me a 270wsm die last November. If any of you reload 243, 35.5 grains of imr3031 and 100 gr. nosler partition shoots great out of my ruger m77mkII. Prolly taken 6 coues, 1 Wyoming antelope and 5 mile deer. Share this post Link to post Share on other sites
dse Report post Posted April 6, 2015 130gr swift scirocco, 65 gr of Rl-22, fed 215M primer, winchester brass. I'm getting 1/2 moa and have killed 4 coues bucks between 300 and 500 yds. None have taken a step after the shot. Share this post Link to post Share on other sites
