forepaw Report post Posted March 1, 2015 I have loaded and fired them with max. and just under max. handloads for years with no problems. They are harder due to the nickel wash, and to me this has been most noticeable during trimming, chamfering and deburring. Just slow down during these steps. The advantages are 1. they seem to be easier to keep clean; 2. they are easy to find after you fire them at game; and 3. if you have other similar calibers ('06 based like a .270 for example), you know what you are grabbing if you see that shiny metallic flash. I only use them for hunting in my .25-06, and they have been fine. If you want true premium brass, be prepared to pay for Nosler, Lapua, or Norma. This is all GOOD stuff, and worth the extra $$ IMO. I think commercial brass in general, like .22 rimfire ammo, has deteriorated in terms of QC over the last generation or so. forepaw 1 Share this post Link to post Share on other sites
roninflag Report post Posted March 2, 2015 Hard- i use nickel in mostly in calibers i can't get lapua; like the .280 remington. i have had excellent results and i pay more for it. i shoot it in my garands. it is easier to find and it distinguishes my brass from others at a match. i tumble it before and after sizing . i camfer the inside and outside of the case necks well . loaded with a ballistic silvertip the ammo is quite attractive too. 1 Share this post Link to post Share on other sites
