Hunter4Life09 Report post Posted June 12, 2014 Does anyone have a load they would like to share for a 7mm using 168 grain berger vld ' s and hodgdon h1000 powder I can't seem to find any data Share this post Link to post Share on other sites
308Nut Report post Posted June 12, 2014 http://www.hodgdonreloading.com/data/rifle They don't list the 168 specifically but do list the 162 and 170. That should get you started Share this post Link to post Share on other sites
Shedhunteraz Report post Posted June 12, 2014 Does anyone have a load they would like to share for a 7mm using 168 grain berger vld ' s and hodgdon h1000 powder I can't seem to find any data is it a mag or not? Share this post Link to post Share on other sites
Shedhunteraz Report post Posted June 12, 2014 Does anyone have a load they would like to share for a 7mm using 168 grain berger vld ' s and hodgdon h1000 powder I can't seem to find any data I used to run 72.2 with the hornaday 162 sst. I have now switched barrels and twist rate and went to a 175 gn sierra, so trying my own out now. I would start in the middle around 65. Because the high is 71 and low is 61 or 62. Share this post Link to post Share on other sites
juliuscesar Report post Posted June 12, 2014 i don't have a 7mm mag, is a 7mm mag that you are asking about? but i have the berger manual and this is the data: start load= 62.5/ 2668 ft per second. max load= 69.5/ 2987 ft per second. approx fill ratio 100%. this is for h1000 powder. hope this helps. Share this post Link to post Share on other sites
PRDATR Report post Posted June 14, 2014 http://www.longrangehunting.com/forums/f28/7mm-rem-mag-h1000-168vld-quickload-61888/ Share this post Link to post Share on other sites
lancetkenyon Report post Posted June 23, 2014 www.reloadersnest.com I will assume a 7mm Rem Mag. But you can get info on just about any round. http://reloadersnest.com/frontpage.asp?CaliberID=48 Share this post Link to post Share on other sites
