Chronograph & Sonic Cleaner for sale

[willhunt4coues]

I have a Prochrono digital for sale. Works great just upgraded to the Magnetospeed. They go for around $120.00 and would take $80.00 I have everything for it even the instructions.

 

Also have a Lyman Sonic Cleaner it works great just upgraded to a bigger model have everything for it too. I bought it for $67.99 + tax and would sell for $40.00.

 

[willhunt4coues]

For those of you that don't know what a sonic cleaner does here is a little info:

 

Lyman's new Turbo Sonic 700 is sized for small batch cleaning of cases, firearm parts, dies, mould blocks, cylinders, magazines, etc. Simple, push button digital controls. The Turbo Sonic 700 has a stainless tank with a plastic parts basket. Includes a watch stand and CD holder.

• Uses advanced oscillation circuitry.
• Processes up to 100 9mm cases.
• 2 color LED display with 5 timed cleaning cycles.

WEIGHT: 3 lbs

 

Inside and out in less than 10 minutes.

Lyman's new Turbo Sonic delivers ultrasonic cleaning that allows the reloader to clean cases inside and out in less than 10 minutes. The heated tank and Lyman's specially formulated case cleaning solution deliver superior case cleaning of case and primer pockets. The ultrasonic cavitation lifts and dissolves carbon, dirt and any residue left on fired cases.

 

TURBO® SONIC CONCENTRATED

CARTRIDGE CASE

CLEANING SOLUTION

Scientifically formulated to clean brass cases, will

remove tarnish, oxidation, and carbon buildup better than

competitive formulas. Designed for use in Lyman Turbo

Sonic cleaners and other ultrasonic cleaners. Cleans

brass inside and out, including primer pockets.

• Can be used to clean brass, copper, bronze and

stainless steel

• May be used for removal of light rust from steel

parts, but parts must be inhibited after cleaning

• Not recommended for use on aluminum or steel (other than for

removal of light rust)

• Parts to be cleaned should not have excessive oil - remove bulk oil

before cleaning in this solution.

• Not recommended for cleaning silver, sterling silver or silver plating.• 6 •• • • 6 •

• Will effectively clean gold jewelry, but avoid immersion of gemstones in

the solution as they may be damaged by the solution or sonic energy

or both.

• For optimum performance when cleaning cartridge cases, avoid more

than 2 layers - keep as much space between cartridges as possible.

• When cleaning cartridge cases, remove the basket from the unit and

load the shells into the basket. Lower the basket into the solution and

shake the basket slightly to help dislodge any bubbles that might be

present inside the cases.

• After making a new cleaning solution, preheat your cleaning solution

mix and run the unit for a minimum of 3 minutes to de-gas the mix.

Dissolved gas in the solution can diminish the ultrasonic energy. Once

de-gassed, it is not necessary to de-gas again until the solution is

changed.

• Discard the solution when it becomes highly discolored or

murky. Rinse the unit with clean water before recharging.

• Do not mix with other cleaners or chemicals.

TURBO® SONIC CONCENTRATED

STEEL & GUN PARTS CLEANING SOLUTION

Scientifically formulated solution to clean steel and stainless

steel parts, removes oil, dirt, carbon build up and powder

residue. Ideal for deep cleaning gun parts and other steel

items including reloading dies and mould blocks.

Designed for use in Lyman Turbo Sonic cleaners and

other ultrasonic cleaners.

• Can be used to clean steel, stainless steel and aluminum gun parts.

Should NOT be used on bare aluminum and non-ferrous metals.

• When cleaning aluminum, keep the use of the sonics to the minimum

time needed.The part(s) can be allowed to soak (no sonics) to help in

decreasing the time required for sonic cleaning. Aluminum can be

damaged by excessive sonic energy.

• Designed to clean oil/grease and carbon buildup.

• Not recommended for cleaning silver, sterling silver or silver plating.

• Avoid cleaning jewelry, particularly gemstones in this cleaning solution.

• Will provide limited corrosion protection - after cleaning, do not rinse

the part(s). The part(s) should be properly drained and allowed to air

dry. Not meant as a long term inhibitor - part(s) should be oiled for long

term corrosion protection.

• After making a new cleaning solution, preheat your cleaning solution

mix and run the unit for a minimum of 3 minutes to de-gas the mix.

Dissolved gas in the solution can diminish the ultrasonic energy. Once

de-gassed, it is not necessary to de-gas again until the solution is

changed.

• Discard the solution when it becomes highly discolored or murky.

Rinse the unit with clean water before recharging.

• Do not mix with other cleaners or chemicals.

[WHT_MTNMAN]

Sent you a PM. I'll take them both. I'm in Show Low

[willhunt4coues]

Sold pending funds.