Coues assassin Report post Posted January 23, 2014 http://www.newarchery.com/products/d6-broadheads/big-nasty-12/ Anyone ever try these? Thought about giving it a try Share this post Link to post Share on other sites
Norteno Report post Posted January 24, 2014 **Important!!! You must cut your arrow shafts 1” longer than you usually do for this broadhead to work. Not sure how many people would do this. Looks like it is welded, can't be cheap. Share this post Link to post Share on other sites
bowhuntinmaniac Report post Posted January 24, 2014 Looks like the old Snuffers. The width of the blades are way to flimsy to go thru any heavy bone and survive. Share this post Link to post Share on other sites
GotBowAz Report post Posted January 27, 2014 Looks to me like you would have to buy a specific diameter arrow shaft to support the trailing end of the head. Too large a diameter arrow it wont go on, too small and it will allow the head to tweak on impact, and yes, it appears a little flimsy. I like the idea behind it though as far as flight goes. It would have much less drag and steering capabilities as other heads would which would make it much easier to tune. I dont like that I might have to buy certain arrow shafts to accommodate the head. GBA Share this post Link to post Share on other sites
