azcoueshuntr Report post Posted December 4, 2013 anybody know where i can purchase large quantities of some 1/2'' AR500 steel local in arizona. lookn for 2 at 10'' 2 at 12'' 2 at 15'' 2 at 18" and 1 at 21'' Share this post Link to post Share on other sites
AxisWorks LLC Report post Posted December 4, 2013 IMS had AR-400 not to long ago. Id contact them and see. http://www.industrialmetalsupply.com/?gclid=CNz60fKWl7sCFZFxQgodTVEA0w I'm running 1/4" AR-500 and the .338 is dishing the plate pretty good. (not cratering it but dishing the whole plate after several rounds) Id go with a minimum of 1/4" thick IMO. Good luck. 1 Share this post Link to post Share on other sites
gaps Report post Posted December 4, 2013 Thanks for the info! Share this post Link to post Share on other sites
azcoueshuntr Report post Posted December 5, 2013 im lookn for 1/2 inch they get lots of use we replace them about every 2 years at our local range Share this post Link to post Share on other sites
azgutpile Report post Posted December 5, 2013 There is a place off of ironwood south of baseline that does a lot of armor work that will sell you a sheet cut to your specifications for cheap. Can't remember the name right now, but they are directly across the street from A1 steel. It was pretty cheap too. Share this post Link to post Share on other sites
Gbarcom Report post Posted December 5, 2013 Temtco steel apache junction all sizes of ar500 in any thickness 1 Share this post Link to post Share on other sites
STOMP442 Report post Posted December 5, 2013 The target man. www.thetargetman.com Share this post Link to post Share on other sites
Buglemin Report post Posted December 5, 2013 Hi- not sure if you already found the steel your looking for, if not call Carl at 602-443-5105, tell him Dan from Silver City said to take care of ya, he will take care of you....they are located downtown Phoenix Maricopa Fwy... Regards- Dan. Share this post Link to post Share on other sites
