shuller70 Report post Posted September 4, 2013 Does any one have a .280 ai dies or where would be the best place to get a set. Also which brand is the best for the 280 ai thanks Share this post Link to post Share on other sites
thegunsmith2506 Report post Posted September 4, 2013 Check ebay. I picked up a set of Redding dies for pretty cheap a while back. Share this post Link to post Share on other sites
rcdinaz Report post Posted September 4, 2013 Bruno's should have them or will order them immediately if out. Or just go to redding they will stock that caliber since it is a big benchrest caliber. Get the bushing dies and order at least one or two bushing above or below the std neck size so you can play with how tight the neck is. Share this post Link to post Share on other sites
briant_az Report post Posted September 4, 2013 Brunos has the redding dies that use the bushings. I ordered mine from midway because I didnt want to use the bushings. Share this post Link to post Share on other sites
kazpilot25 Report post Posted September 4, 2013 I've got a set of the Lee 280 AI dies. They're brand new never used. As far as I understand, they are for the original AI not the Saami spec. Share this post Link to post Share on other sites
sjvcon Report post Posted September 6, 2013 You need to make sure you get the right ones. The original .280AI is not the same as the one that is SAAMI. Wrong one could be trouble. Share this post Link to post Share on other sites
