Schmitty Report post Posted March 5, 2013 I have had good intentions to cast my own bullets and load steel shotgun shells, but have never had the time to get into it, so I will make a good deal for somebody else who can use this stuff. I am up in Prescott, but can deliver to PHX or Tucson on Saturday March 9th. First is a Bullet Casting Package, All of the gear is used, but in very good working condition. The links just show pics/prices if you wanted to start with all new equipment.Lee Production Pot (older model than what is shown) http://leeprecision.com/production-pot-iv.htmlRCBS Lube-A-Matic http://www.midwayusa.com/product/172702/rcbs-lube-a-matic-2RCBS Ingot Mold http://www.midwayusa.com/product/561601/rcbs-4-cavity-ingot-mold-without-handleRCBS bullet mold handles: http://www.midwayusa.com/product/566980/rcbs-bullet-mold-handles-for-all-rcbs-bullet-moldsRCBS mold 38-150-KT (now SWC) http://www.midwayusa.com/product/436963/rcbs-2-cavity-bullet-mold-38-150-swc-38-caliber-358-diameter-150-grain-semi-wadcutter$215 for everything. As of now, I won't break up the package.I have 370 lbs of lead (wheelweights with some soft lead and misc.tin solder etc.) (Current scrap price is .60/lb)I'll throw the lead in for $150, ONLY IF THE BUYER PURCHASES THE WHOLE PACKAGE TOGETHER! Otherwise I'll take it down to the scrap yard myself. Second is a complete setup to load your own steel shotshells. You can also load lead with this setup as well. 12 Gauge Mec 600 Jr. MarkV http://www.cabelas.com/catalog/product.jsp?productId=751581Mec Steel shot conversion kit http://www.midwayusa.com/product/876728/mec-steel-shot-conversion-kit-for-single-stage-shotshell-press-12-and-10-gaugeMulti Scale Universal C charge bar http://www.midwayusa.com/product/746153/multi-scale-universal-charge-bar-with-powder-baffle-model-c-cs-mec-single-stage-shotshell-loaders-600-jr-sizemaster150 used Winchester AA hulls and RSI Sam-1 Steel shot wads20 lbs size 3 Steel shot (RSI super sam)9.5lbs size 1 Steel shot (RSI super Sam)1 lb Alliant STEEL shotgun powder.The Mec 600 jr. is missing 2 parts (wad holder) which can easily be ordered from MEC for approximately $10-15 shipped. I am happy to supply the part #'s or even order the parts for you. $150 for all of it. I will also be listing this on backpage locally. Please PM me if you have any questions. thanks, Schmitty Share this post Link to post Share on other sites
Schmitty Report post Posted March 5, 2013 I would also consider any trades towards a Rem 700 short action/rifle. Share this post Link to post Share on other sites
Schmitty Report post Posted March 5, 2013 All sold locally! thanks Share this post Link to post Share on other sites
