nighthawk Report post Posted January 20, 2013 When u guys say set to mag length what length are u getting? Coal is 3.6 so what abouts are u guys squeezing into those mags Share this post Link to post Share on other sites
Couzer Report post Posted January 20, 2013 When u guys say set to mag length what length are u getting? Coal is 3.6 so what abouts are u guys squeezing into those magsI just set the bullet so it can move up and down in the internal mag. But yes squeezing them in so they barely don't touch. Have you fired any test loads yet? Share this post Link to post Share on other sites
nighthawk Report post Posted January 20, 2013 Gun is still at gunsmith .. Gonna be another 2 to 3weeks till I get back so I haven't started loads yet. I have 50 new brass and 2 boxes of core locks to shoot to break in and get once fired brass out of. 210 vld ,h1000 and fed 215 primers are what I will start test with . Here is gun with new stock. Still needs break and 220 spin finish, pillar and glass bed. Share this post Link to post Share on other sites
kooter Report post Posted January 22, 2013 Looks like your gunsmith is Steve Crooks??? Share this post Link to post Share on other sites
rcdinaz Report post Posted January 22, 2013 Good looking stick! Ask the gunsmith to give you the measurements he will be able to do it very quickly chamber & magazine. If the mag is shorter than your COAL then you will have to load them shorter or have a single shot. Share this post Link to post Share on other sites
nighthawk Report post Posted February 15, 2013 So I got the gun back yesterday and I am really happy with it. Steve crooks did the work and did a great job 1 Share this post Link to post Share on other sites
