Jump to content
Sign in to follow this  
creed_az_88

carrying your bow on your atv

Recommended Posts

I put it in my case and use cargo netting. nothing fancy but works for me. I also started putting something soft under my sight so there's no pressure on it (had 1 break before). I have an old fleece scarf I use.

Share this post


Link to post
Share on other sites

Years ago I used to do something similar to what naturegirl mentioned. I had a hard case and I just used crank type bike straps to bind it to the front of my quad. It protected my bow very well from anything that might hit it on the trail and from shock. However one time when I came back to my bike my nice expensive hard bow case was gone. I always took it off the quad and slid it underneath when I left to hunt. Never thought I should have to lock it down. That was a lesson learned. I suppose if you bolted it down which was I thought I had you would reduce the theft of it but I used that bow case to fly out of state with and really didn’t want bolt holes in my nice case.

 

Now I use a combination of bow limb holders fore quads, a bungee and cheap swimming pool noodles folded in half and camo covered that works pretty awesome. I will get a picture of it and post it tonight. I found that just bow limb holders still allowed too much movement to my liking on the trail.

 

GBA

Share this post


Link to post
Share on other sites

Years ago I used to do something similar to what naturegirl mentioned. I had a hard case and I just used crank type bike straps to bind it to the front of my quad. It protected my bow very well from anything that might hit it on the trail and from shock. However one time when I came back to my bike my nice expensive hard bow case was gone. I always took it off the quad and slid it underneath when I left to hunt. Never thought I should have to lock it down. That was a lesson learned. I suppose if you bolted it down which was I thought I had you would reduce the theft of it but I used that bow case to fly out of state with and really didn’t want bolt holes in my nice case.

 

Now I use a combination of bow limb holders fore quads, a bungee and cheap swimming pool noodles folded in half and camo covered that works pretty awesome. I will get a picture of it and post it tonight. I found that just bow limb holders still allowed too much movement to my liking on the trail.

 

GBA

 

Thieves suck man, was it a pelican case?

Share this post


Link to post
Share on other sites

I cant remeber what case it was but it was rated to be aircraft worthy. Really strong heavy case with good locks on it also. At the time I thinkit was a $250.00 case. It was foamed deep to handle shock. I have a new one now I replaced it with but it's not as nice as that one was.

 

GBA

Share this post


Link to post
Share on other sites

Regular ol' forked gun rack type mounts, with the extra shock cushioning. Never had a problem with a bow with this setup.

Share this post


Link to post
Share on other sites

$25 Plano plastic bow case from WalMart bungeed to the front rack. protects the bow and whatever else you can cram in there.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×