deserthntr Report post Posted September 6, 2010 i need a good gunsmith in mesa just to do a quick trigger adjustment for me. i looked online and found instructions to do it myself but i figured better be safe and just go to a gunsmith. i know at usery there is a good gunsmith but i heard the wait is really long for him. thanks Share this post Link to post Share on other sites
youngbuck Report post Posted September 6, 2010 I its a 700 or 70, see if you can do it. Mesa smiths are kodiak precision, accuracy speaks, and i think its called mesa gun near dobson. Or call timney trigger here in the valley. Share this post Link to post Share on other sites
MangeyJoe Report post Posted September 6, 2010 Go to Mesa Gun Repair on Broadway in between Stapley and Mesa Dr. I been going there for years. He does everything on the spot, he reassembled on my shotgun and fixed my mosin nogent trigger 7.62x54R, VERY VERY FAST. I never had a problem with him. He will do your trigger adjustment in less than two minute. Here's there number :480-962-8394 Share this post Link to post Share on other sites
Stray Horse Report post Posted September 7, 2010 John at Mesa Gun Shop will take care of you. He's on Broadway and Horne. Share this post Link to post Share on other sites
BASS Report post Posted September 9, 2010 I wouldn't go to Guns Etc in Chandler. They did my Rem700 for me. It was light enough that a drop from a couple inches dropped the hammer. I wanted a lighter trigger, not a hair trigger. They didn't seem to see what the problem was when I took it back. Share this post Link to post Share on other sites
