deserthntr Report post Posted March 25, 2010 i have a SDP and today when i shooting i noticed my 80 pin was all the way down. so i tried to move it back and the screws just go all the way in without tightening on each other and when both are all the way down the pin still moves. can i just send it in to spott hogg and get a new one or it fixed for free? Share this post Link to post Share on other sites
azcoues33 Report post Posted March 25, 2010 Get ahold of spot hogg or the shop that you bought it from and they should be able to get you set up. They will probable just send you a new pin and screws. Share this post Link to post Share on other sites
Kaffer62 Report post Posted March 25, 2010 Spot hogg will take care of you... I sent my SDP back for a refurbish and their warrenty covered the screws and pins... Share this post Link to post Share on other sites
BowNut Report post Posted March 25, 2010 Ya what they said. Spot hogg will take care of you. Go through the shop you bought it at or contact them direct. Share this post Link to post Share on other sites
Coues 'n' Sheep Report post Posted March 25, 2010 Ditch the SDP and move on to the Axcel sites.... Share this post Link to post Share on other sites
BowNut Report post Posted March 25, 2010 Ditch the SDP and move on to the Axcel sites.... A Shark Among Guppies Share this post Link to post Share on other sites
bowstringmusik Report post Posted March 25, 2010 Keep the SPD noodlehead, Don't buy the axcel, they rattle. Spot Hogg has a lifetime warranty. Share this post Link to post Share on other sites
