whisper Report post Posted October 19, 2009 I have several items for sale to fund a mountain rifle build. TC Encore Frame in walnut with lots of Mike Bellm extras -Hammer extension - installed -heavyduty hammer spring - installed -headspace indicator base - takes standard dial indicator -heavyduty locking bolt spring - installed -oversize hingepin 1x and 2x - 1x installed - hingepin no longer moves around - drop in fit with my 7 mag barrel -trigger springs 3-6 - factory installed -Limbsaver recoil pad -Leupold qwik release base and 1 in rings - never looses zero - easy to remove scope for cleaning -Karsten adjustable cheek piece - installed -Home made wood buttstock extension- about 1 inch -sinclair rod guide -Trigger job - very nice crisp trigger - set at two pounds - with variation of trigger springs and hammer sping you can set to 1-4 pounds with a reliable trigger - any lighter hammer would fall with pressure - you can set lighter for benchrest use but not recommended for hunting -Forend pillar bedded with home made pillars and free floated The metal in is in excellent conditions with no scatches. The wood has some dents and a few small scatches, nothing major. All this would cost over $600 if you bought it all seperate. $425 OBO for all - shipped through FFL or can arrange pickup Nikon Monarch UCC Riflescope with BDC Reticle 5.5-16.5x44 matte black I had this on the Encore. The glass is excellent condition with no scratches. There is ring marks behind the turret and a ding in the windage turret cap. The rest of finish is like new. SOLD Pentax 16x60 PCF WP Binoculars These used to be my go to coues binos but upgraded to swarovskis. They are in good shape. The outer rubber coating has some scratches and the bottom of the lenses have a few tiny hair line scratches but do not affect image. SOLD TWO 20 lb CO2 Tanks I used these for paintball CO2 tank refills but would also work great for offroad vehicle tire inflating system, kegerator, or welding. These tanks are swapouts from US Air Weld and they have a siphon in them. It used to cost around 16 bucks to swap out for a full tank and you can get them without a siphon if you want when you exchange them. SOLD Paintball CO2 refill station This was used to fill the 20 oz or smaller tanks for paintball. Worked better with the 20oz. It just screws into the tanks above. SOLD Convair Polar Pride portable evaporative cooler I only used this for about 6 days while our AC was replaced. Works great for small areas. Its rated to cool 200 sq ft. These run around $250 to $350 in comparable models. SPF I am located in Tucson to arrange pickups. I do travel for work so we might be able to meet depending on location. I have plenty more pictures if needed. PM or email me with any questions or offers at craig098@gmail.com Share this post Link to post Share on other sites
whisper Report post Posted October 24, 2009 Changed shipping on Encore and Convair. I will cover shipping. Make me an offer. Share this post Link to post Share on other sites
GameHauler Report post Posted October 24, 2009 Couple of questions: Where are you located? With the over size hinge pin would that mean that the barrel would have to be drilled out? If one wanted to remove the stock extension what would it involve? Share this post Link to post Share on other sites
TREESTANDMAN Report post Posted October 24, 2009 Pm'd you. thx, Mike Share this post Link to post Share on other sites
whisper Report post Posted October 25, 2009 Gamehauler, On my 7mm mag encore prohunter barrel that I had I was able to use a punch or soft hammer to put the pin in and take out. No drilling required and I think the 2X pin would do the same, with a little more force but never tried it since the 1x fit so well. The pin will not come out on its own like the factory pin and you can feel the difference between the stock and factory pin. The 1x had no slop while the factory did. On Mike Bellm website he explains the benefits of a tighter fitting pin. You should have no problem putting the 1x pin on any of your current barrels, if you have them. The stock extension is only screwed in to the stock using different holes then the recoil pad. All it would invalve is removing it and scewing the recoil pad back on using original screw holes. I felt the standard stock to be a little to short for me so that is why I added it. I can send you pics if you want let me know. I am located in Tucson. TREESTANDMAN, PM/TEXT SENT Share this post Link to post Share on other sites
