Extreme Coues Report post Posted June 29, 2009 Looking for internal wall tent frame for a 14x17x5 Montana canvas tent Share this post Link to post Share on other sites
SO I HUNT Report post Posted June 29, 2009 Made mine and saved $$$$$$. I welded all the angles ( 1-1/4" to make all the angles peices and 1" for all the legs and rafters ) and just make sure to smooth all surfaces on all your angles brackets I believe that I used 1-1/4" conduit for the 1" to slip in to. I think you can buy the angle brackets and than just go buy the conduit and cut it yourself and save some money that way as well? Share this post Link to post Share on other sites
DesertBull Report post Posted June 29, 2009 Yep. You can buy the angles on EBAY fairly cheap and cut your own conduit. Share this post Link to post Share on other sites
johnnie blaze Report post Posted June 29, 2009 I bought the angles and cut conduit for mine as well. Like previously said, make sure the cut ends arent sharp. I tried to keep all my lengths around 5' for packing purposes and used connectors. Also make sure that your measurements are a lil less then strong. And mark each tube so you dont get confused over the years. the minus is the weight. conduit is much heavier then aluminum. I think sportsmans sells em, but they sure aint cheap. Share this post Link to post Share on other sites
