Ed67 Report post Posted Friday at 01:11 AM Tire question for 1/2 ton truck trailer pullers. Anyone here running Load range F tires instead of E? I currently have F rated tires/Toyo AT3s on my Tundra but dang are they a rough ride and wondering if it’s overkill. my current trailer is about 5300 empty. Share this post Link to post Share on other sites
Adicted Report post Posted Friday at 01:31 AM F is over kill. E is what i always use in my diesel pulling heavy and no issues. 2 Share this post Link to post Share on other sites
Ed67 Report post Posted Friday at 01:44 AM 11 minutes ago, Adicted said: F is over kill. E is what i always use in my diesel pulling heavy and no issues. Thanks I needed some affirmation Share this post Link to post Share on other sites
654321 Report post Posted Friday at 02:49 AM Run BFG KO2 load range E on my F150, run 80psi when pulling my 24ft travel trailer. When I get to camp I drop the tire pressure back down to 32psi. Air back up to 80 when pulling trailer back. 1 Share this post Link to post Share on other sites
Roosevelt Mark Report post Posted Friday at 04:58 AM E is fine, I pull 35 ft 5th wheel all over the west. Share this post Link to post Share on other sites
Hoss50 Report post Posted 22 hours ago D or E should be fine. F is way to much. I have run D & E on 3/4 and 1 ton trucks. The nice part about heavier tires is tougher sidewalls. That also is what causes worse eise though. My 1 ton right now has E rated and I down my 21' trailer at about 55psi. I street drive it at about 40psi. Share this post Link to post Share on other sites
Ed67 Report post Posted 13 hours ago I’m definitely switching from F to E Share this post Link to post Share on other sites
