12' aluminum boat and trailer Sold

[Jasper17]

For sale is a 12' Valco boat and trailer with a few things to go with it. My puppy ate the trailer light wiring but not hard to replace. I have 2 spares that have been in my shed for a while and are probably OK. I have the title for the trailer and can write up a bill of sale for the boat to get that registered at G&F. I'm probably missing something so ask questions if you need more info.

[Jasper17]

SPF

[CouesFanatic]

If they back out let me know. I'm interested. 

[Hopsfarmer]

Great price man. Wish I needed one

[Roofer Billy]

This is that $600 boat now. Completely coated with 4 coats of white flex seal and 4 coats of red flex seal . And 4 coats of clear. 

[Roofer Billy]

Hopefully no leaks. It leaked pretty bad before. I power washed it off and scrubbed it with dawn dish soap. To remove any oil and dirt. Then flex sealed it . Going to deck the front and rear in also. And install two swivel bass seats . Like this. The decks will be done in black carpet. And a 5.5 Johnson Evenrude with a 42 # trolling motor on it. Should be a really good little boat. 

[twistzz]

You go dude fun project!!  Send more pics when it’s done.

[Roosevelt Mark]

Outstanding fishing boat, good job!

[Roofer Billy]

Rewired the trailer today and put new running boards on it. Removed both wheels and bearings. Bearings were good so cleaned them up, repacked them with marine grade grease, and Installed buddy bearings. And put two new tires and rims on it. Going to make a spare tire holder ,and a step attached to the side of the front tie down and hand winch.

The flex seal turned out excellent. Very curious to see how durable it is. Filled the boat with water and no leaks. I will add some pictures later. After I get the boat back on the trailer. 

[Roofer Billy]

Getting there . Just need to finish the deck on the front . And touch up the paint here and there. And install the seats. Going to cut and bend a 1/4 inch piece of polished aluminum, for the very front of the boat (Bow). So I can mount a bow mounted minnkota 40# trolling motor on it. With a remote control or foot pedal control. And front lights.. .

By the way if anyone has a bow mounted trolling motor. That they want to sell, hit me up. Has to be a 12 volt foot control,or remote controlled in 40# or more. Thanks Billy 

[Roofer Billy]

Trolling motor??

[couesbuck22]

2 hours ago, Roofer Billy said:

Trolling motor??

I’ll message you in the morning have a brand new one never used it’s a 12V can’t think of the thrust off the top of my head. Foot controlled. Bought it to upgrade on the boat I had at the time and sold the boat few days later and the guy didn’t want it. I live in Williams though can take it flag any day of the week on my way to or from work. Also go to tonto basically every weekend can meet you at the iga our place is like 2 minutes away

[Roofer Billy]

15 hours ago, couesbuck22 said:

I’ll message you in the morning have a brand new one never used it’s a 12V can’t think of the thrust off the top of my head. Foot controlled. Bought it to upgrade on the boat I had at the time and sold the boat few days later and the guy didn’t want it. I live in Williams though can take it flag any day of the week on my way to or from work. Also go to tonto basically every weekend can meet you at the iga our place is like 2 minutes away

That sounds good. Get back to me soon please.