12' aluminum boat and trailer Sold

[Jasper17]

For sale is a 12' Valco boat and trailer with a few things to go with it. My puppy ate the trailer light wiring but not hard to replace. I have 2 spares that have been in my shed for a while and are probably OK. I have the title for the trailer and can write up a bill of sale for the boat to get that registered at G&F. I'm probably missing something so ask questions if you need more info.

[Jasper17]

SPF

[CouesFanatic]

If they back out let me know. I'm interested. 

[Hopsfarmer]

Great price man. Wish I needed one

[Roofer Billy]

This is that $600 boat now. Completely coated with 4 coats of white flex seal and 4 coats of red flex seal . And 4 coats of clear. 

[Roofer Billy]

Hopefully no leaks. It leaked pretty bad before. I power washed it off and scrubbed it with dawn dish soap. To remove any oil and dirt. Then flex sealed it . Going to deck the front and rear in also. And install two swivel bass seats . Like this. The decks will be done in black carpet. And a 5.5 Johnson Evenrude with a 42 # trolling motor on it. Should be a really good little boat. 

[twistzz]

You go dude fun project!!  Send more pics when it’s done.

[Roosevelt Mark]

Outstanding fishing boat, good job!

[Roofer Billy]

Rewired the trailer today and put new running boards on it. Removed both wheels and bearings. Bearings were good so cleaned them up, repacked them with marine grade grease, and Installed buddy bearings. And put two new tires and rims on it. Going to make a spare tire holder ,and a step attached to the side of the front tie down and hand winch.

The flex seal turned out excellent. Very curious to see how durable it is. Filled the boat with water and no leaks. I will add some pictures later. After I get the boat back on the trailer.