Antler assassin Report post Posted September 24 We are looking for a roof for our 2014 Polaris ranger crew. Ours flew off on the highway on the way back from an elk hunt. Please let me know if you have one available. Thank you Share this post Link to post Share on other sites
AZ_SAWBUCK Report post Posted September 24 I made mine out of aluminum! Cheaper than a stock one. Bought a sheet at Industrial Metal and had it cut and bent at Get Bent..... 45 on front and 90 on back and snipped the front corners at 45! Screwed it down to the roof with self tappers. You can stand on it.....wont rust... Good Luck 2 Share this post Link to post Share on other sites
Antler assassin Report post Posted September 25 What thickness did you get? That’s a great idea Share this post Link to post Share on other sites
matt Report post Posted September 25 6 hours ago, AZ_SAWBUCK said: I made mine out of aluminum! Cheaper than a stock one. Bought a sheet at Industrial Metal and had it cut and bent at Get Bent..... 45 on front and 90 on back and snipped the front corners at 45! Screwed it down to the roof with self tappers. You can stand on it.....wont rust... Good Luck I did the same and loved it for a while. Could never get rid of all of the rattles though. Share this post Link to post Share on other sites
Savageman2506 Report post Posted September 25 I'd put some weather stripping between the aluminum and the rails, then screw it down. Should help with rattle. A thicker sheet will probably help it be less noisy. Share this post Link to post Share on other sites
Crazymonkey Report post Posted September 25 Home depot has rubber weather stripping that works great for this. Definitely stopped the rattling. Share this post Link to post Share on other sites
AZ_SAWBUCK Report post Posted September 30 One thing I did do was use those rubber washers from HD when I mounted it originally. I installed about 1/4" of rubber under every screw. It was a necessary part of securing it down tight. I know all the car guys probably cringe when they hear holes and self tappers. I cant remember the thickness or the density of aluminum, I do remember it wasn't the hardest they had. Share this post Link to post Share on other sites
Antler assassin Report post Posted September 30 On 9/24/2024 at 2:46 PM, AZ_SAWBUCK said: I made mine out of aluminum! Cheaper than a stock one. Bought a sheet at Industrial Metal and had it cut and bent at Get Bent..... 45 on front and 90 on back and snipped the front corners at 45! Screwed it down to the roof with self tappers. You can stand on it.....wont rust... Good Luck So you have two pieces of aluminum as your roof? My ranger is 55 inches wide Share this post Link to post Share on other sites