ewilly Report post Posted December 26, 2022 I seized a case in the sizing die in my Hornady set so I thought I would see if anyone has at least a sizing die to sell before I order another set. THX Share this post Link to post Share on other sites
L Cazador Report post Posted December 26, 2022 What's wrong with the Hornady set? They have Redding precision set on sale at Midway. Get Redding full length Type S bushing sizing die. I believe Brunos had them too, cheaper than Midway. Share this post Link to post Share on other sites
Fern Report post Posted December 26, 2022 Instead of buying a new die set can you remove the stuck case? Get a tap and die set drill it tap it and get a bolt to remove. happened to me recently and father in law had a tap and die set to remove it. mended up getting another stuck case afterwards and removed it again and out more lube on it 1 Share this post Link to post Share on other sites
PRDATR Report post Posted December 26, 2022 Plenty of videos on You Tube on how to remove a stuck case. What kind of lube were you using? Imperial Sizing Wax works very well. The best was the Dillon spray lube in an aerosol can but it only lasted a couple of years and they went to a pump bottle, which was not as good. 1 Share this post Link to post Share on other sites
Crazymonkey Report post Posted December 26, 2022 Super easy to get a stuck case removed rcbs makes a tool for it.Me being a machinest I made my own on a Sunday while I was making double time .Probably the most expensive ever ! Made outa stainless steel took a few hours. Rcbs are about 19 bucks last I looked.Try the hornady one shot spray lube . 1 Share this post Link to post Share on other sites
ewilly Report post Posted December 26, 2022 I do have a tap set and I will do a search but even if I get the case out the root issue still remains. I was using some Lyman aerosol lube and I tried two different cases and both did not like the die and 6 or 7th case seized. THX for the recommendations. Share this post Link to post Share on other sites
Fern Report post Posted December 27, 2022 Look into making your own lube with lanolin. YouTube has directions on doing so. After my cases got stuck I gave them another spritz and was good Share this post Link to post Share on other sites
L Cazador Report post Posted December 27, 2022 Redding die wax is the best lube. Rub it on with your fingers and never stick another case again. Brunos has some in stock. I used to make my own with anhydrous lanolin and white vaseline but when a container of die wax lasts more than 5 years, why bother? I load thousands of rounds a year! Share this post Link to post Share on other sites
