hunt87 Report post Posted November 14, 2021 Hi I’m having a issue with a new gun. And need to try some factory loads in it to see if the problem proceeds with factory loads. So if anyone has or willing to let buy a few rounds of them I only need like 4/5 I would appreciate it. Share this post Link to post Share on other sites
Tannert Report post Posted November 14, 2021 If you make it down to the Valley I would give you 5 Hornady 162 ELD-X rounds. Share this post Link to post Share on other sites
Ernesto C Report post Posted November 14, 2021 What issues are you having if you don't mind me asking? Share this post Link to post Share on other sites
hunt87 Report post Posted November 14, 2021 Sticky bolt and my load is under book. The chamber is on the small side. It’s a fierce edge and I called them and they want me to try factory loads to see if dose the same. But I know it’s not the loads. Share this post Link to post Share on other sites
coues@186 Report post Posted November 14, 2021 What brass are you using? I my newer Nosler brass sticks or jams. Same load as I always have used. So maybe there is an issue with some of the nosler brass.. Share this post Link to post Share on other sites
hunt87 Report post Posted November 14, 2021 It nosler brass Share this post Link to post Share on other sites
CDjunkie Report post Posted November 14, 2021 I'm in Vail, if your around here I can give you a few of the Factory 150s and 175s. I reloaded my own with the 195s your more than welcome to try if you have a 1:8 twist. I use the nosler blem brass. Haven't had a issue yet. Knock on wood Share this post Link to post Share on other sites
lancetkenyon Report post Posted November 14, 2021 Interesting. Was at the range today, and a guy 2 benches down had the same issue with his new Fierce 28 Nosler and factory Nosler ammo. Barely able to lift the bolt with two hands, major case head swipes, flattened and cratered primers, soot all over the case head. Share this post Link to post Share on other sites
