Search the Community

I am now selling my other Savage 6.5 Creedmoor. Rifle has about 350 rounds through it. I have 64 very precise loaded rounds that also go with gun. Brass is nosler, cci-br2 primers, h4350 @ 41.4 gn, and loaded with Berger 140 gn VLD hunting bullets. I will also provide the buyer with all the specs i have for this rifle like seating depth, powder info, throat info, headspace info, ect. This gun produces 2" groups at 750 yards. 2800 fps. This rifle is very precise and accurate. I am asking 2000.00 for everything above. Please see below for all other info. Does not come with scope or rings. Rifle parts: Savage model 10 action Shilen stainless steel select match 26" 6.5 Creedmoor NSS recoil lug and barrel nut Rifle basix trigger set at 1.5 lbs PTG fluted bolt body and PTG bolt head Glades Armory bolt knob Karsten comb HS Precision PSV 118 stock has been bedded with devcon Harris bipod HBLS swivel model with s/lock 20 moa Valdada base 64 loaded rounds; Nosler brass annealed after every firing CCI Br2 primers Berger VLD 140 gn hunting bullets H4350 at 41.4 gn 2800 fps ES 10 SD 4 This gun produces less than 1/4 groups consistently at 100 yards. Rifle with scope weights 11.5 lbs. This scope only weights 1.5 lbs so gun is about 10 lbs give or take 1/2 lbs 2 separate 3 shot groups 100 yards 10 shots at 100 yards Clay Price 928-200-0166

Selling my custom Remington 700 in .280 Ackley Improved... (Shoots 7mm bullets...fyi) 1) Remington 700 Action Blue Printed, bolt and lugs trued and lapped 2) Shilen barrel 3) Bell and Carlson Medalist Stock 4) Timney Trigger This is another of my 1,000+ yard rifles that is up for sale... My hunting load shoots .484" groups at 100 yards (see pic). FYI, the Ken Farrell 20 MOA Rail shown in the pic's is not included. Ric 602-330-4664

Another one of my custom rifles up for sale... This custom build started as a Weatherby Mark V Ultra Lightweight factory model (from the factory it weighs under 6lbs) in the .257 Weatherby cartridge ($2,100 MSRP...no I didn't pay retail...who does that). I stripped the fluted #2 contour factory barrel (still have it if you want it) and had a Shilen match barrel installed, the receiver was blue printed, bolt face was trued and lugs lapped, stock was then glass bedded, then added a Timney trigger, a 20 MOA rail, Talley rings and to top it off I just mounted the Nightforce 5.5-22x56 scope with the NPR-1 illuminated reticle to sweeten the deal. Awesome deer rifle, flat shooter, shoots sub 1/2" groups with Weatherby factory ammo and my custom loads. (It loves the Barnes 115g TSX bullets (devastating when they hit animals). $3,000 for the full set up PLUS over 150 brass (some are brand new-never even prepped, all brass are factory Weatherby), RCBS dies and just under 100 of the 115 TSX bullets I have left. Call with questions, thanks for looking... Ric 602-330-4664