Search the Community

Browning xbolt mountain pro 6.5 creedmoor new in box. Buy the rifle and swarovski scope and I will make ya a deal on both 2000 obo 3 zero 7- 67 zero- five 3 nine 8

Selling my KRG X-Ray Chassis, I used it on a Tikka T3X 6.5 Creedmoor but it fits all Tikka T3 and T3X short actions. I'm selling with or without accessories: Like new, no dings, dents, scratches, etc... Chassis, 5-Round KRG Logo AICS Mag, Minimalist Spigot Mount, $350. https://kineticresearchgroup.com/product/x-ray-chassis/ Located near AZ-51 and the 101.

Rifle is set up and ready to hunt now! It’s dialed and shoots great groups. Has Leupold VX-3HD 4.5-14X40 CDS-ZL WIND-PLEX BURNT BRONZE CDS scope. Very clear and crisp. I have a custom dial set for Hornady Precision 143 bullets, and I have 3 boxes of Hornady Match 140. Super cool rifle. No scratches or marks anywhere. It’s been well taken care of. $1500

Hey all, looking to sell my Bergara HMR 6.5CM. I’m looking for $800 for the rifle. Only 100rds through the gun. Jeff

READY TO SHOOT PACKAGE - Just add your scope and you will have everything you need to get started in precision rifle. PACKAGE INCLUDES - GEN 3 Ruger Precision Rifle in 6.5 Creedmoor. - Extremely accurate gun - With good ammo and a good shooter, this gun is well capable of consistently shooting 1/2"-1/4" MOA. (See attached photo @800 yrds. Done with this gun and custom reloads - The exact reload recipe will be included.) - Hornady Match Grade 6.5 Creedmoor die set with neck bushing included. - (112) Rounds of ONCE fire Hornaday brass. (Fired from this exact gun) - (50) Rounds of unfired Hornady brass reloads with130 grn. ELD-M bullets. - (23) Rounds of once-fired Hornady brass reloads with130 grn. ELD-M bullets. - Recipe with exact headspace and COL for the above reloads and 140 grn. ELD-M's - the guns favorite load. - 100 Round green Case Guard case that is shown in the photo. - (2) Gen3 Magpul PMAGS - BIPOD IS NOT INCLUDED. UPGRADES TO THE GUN American Precision Little Bastard Gen 3 Self Timing Muzzle Break w/Custom Tunning Ports - $195. (https://www.americanprecisionarms.com/products/gen-3-little-bastard-self-timing-muzzle-brake) Titanium bolt shroud from Anarchy Outdoors - $75. (https://www.anarchyoutdoors.com/ruger-precision-rifle-bolt-shroud-replacement/) Upgraded cocking piece from AD Arms - $70. ( https://www.anarchyoutdoors.com/ad-arms-billet-ruger-precision-american-rifle-cocking-piece/) Bolt lapped for smooth bolt throw and manipulation. (Smooth as butter and NO annoing "Zipping" sounds from this baby...) Custom cut deer hide leather cheekpiece. Magpul MLOK barricade stop. Note: This is one of my personal firearms. I purchased it new and have owned it ever since. Must be willing to meet in person in SE Gilbert Area. Must be willing to sign a bill of sale. IF INTERESTED, PLEASE SEND ME AN EMAIL: whiteeye39@yahoo.com. Payment Details Price: $1,350 FIRM. Price is not negotiable. Prefer cash. Credit Card Option Available- There is a 3.5% additional fee to use a credit card that will be added to the costs. NO Checks, Money Orders or any other form of payments accepted.

1 full box Hornady Precision Hunter 6.5 Creedmoor 143 eldx. $45 SOLD 1 full box Browning BXR rapid expansion 30-30, 155 grain $35 1 full unopened box of 100 Hornady 6.5 143grain eldx $45 SOLD 1 full unopened box of 100 Hornady 6.5 interlock, 129 grain $30 1 plastic container with 205 Speer .243 80 grain pointed soft points $30 SOLD 1 unopened one pound container of Accurate 2700 powder, paid $60 at Bruno’s $30 I live in Ahwatukee, will meet within reason FTF sales only 60two 5one2-53fourfive

Located in Phoenix, AZ Will ship if needed I have given my best guess at prices but am willing to accept any reasonable offers. 327 Casings 6.5 Creedmoor - $100 61 Casings 30.06 - $20 161 Casings 7mm-08 - $50

One full box and one partial box with 7 rounds in it. of Barnes VOR-TX LR 127 grain 6.5 creedmoor $54.00 (2.00 per round and no sales tax) Located in the East Valley

Titanium action, Ti bolt with nitride finish. Ti muzzle break,Ti lug, 26 Christensen carbon match grade barrel. Carbon fiber stockys stock dipped in Kuiu verde 2.0. Rail on front for BI pods. HS precision bottom metal with 2 mags. 30mm tally rings. Trigger Tech Special Frictionless trigger. All Cerakote to match. All work done by Pierce Engineering. Shot exactly 40 Times to break barrel in. Gun weight is 7lbs Any questions text 602-370-3844 Brandon Can do PayPal $3500

Well, don't tell the wife, I bought a rifle today and the safe is already full. Cabela's was having a sale on the T/C Compass rifle. I watched a lot of review videos online since the Compass came out and it is suppose to be a heck of a gun. T/C guarantees MOA with quality factory ammo so we will see. They cost of the gun was $299 on sale and then T/C has a $75 mail in rebate, so for $225 I will have a brand new 6.5 Creedmoor. They had to ship from a different store so I will have it by next Friday. Plenty of time to look up load data and dust off the reloading bench. Also to figure out how to tell the wife.

Thanks to those who offered advice on my previous 6.5X55 Reloading Thread http://www.coueswhitetail.com/forums/topic/73806-65x55-se-handloading-whats-its-potential/ Took my new T3 to the range today. Shot 10 different 5 shot strings with both Reloder 23 and Reloder 26, shooting 143gr ELD-X,Lapua Brass, COAL 3.174", .003 off the lands, 22.4" fluted barrel. R26 showed higher velocity and got me up over 3050 fps but all R26 loads were right at, or a hair over 1 moa at 100 yards. Didn't see any classic signs of high pressure, but the brass offered more resistance than I'd like when I resized them. The R23 showed exceptional accuracy in loads between 2830 and 2865 fps (See pics below) and the brass resized effortlessly. I gotta say, this gun is a joy to shoot, weighs a little over 7 lbs scoped and all I did was put in a $7 varmint trigger spring from Ernie the Gunsmith, swap out the T3 Stock for a Takeoff T3X stock, and put on a limbsaver pad. I'm really impressed with the factory trigger, and it breaks cleanly at 1.3 lbs. with the new spring. I might do a little more work with the R26 or some VV N560 or MRP to see if there is an accuracy node around 2900fps, but for now, I'm more than happy with how it shot today and plan on hunting with this load in October. The R23 seems like a winner in the 6.5 swede! avg. 2860 fps avg. 2863 fps avg. 2843 fps

I have an unopened 1 lb bottle of Reloder 16. I bought it for load development but decided to go another route. Paid $32 I'll take $25 looks to be good for light to midwight bullets in 6.5 CM, .260 rem, 30-06, and .270 win , sized cartridges and is temp stable. Click here to learn more. Shoot me a PM if your interested. I am in Chandler.

I'm looking for handload info from those of you experienced with the 6.5X55 SE. I'm curious about what kind of velocity I can safely attain in a modern action. I'd like to get a new 6.5 for this fall and am considering both the 6.5X55 and the 6.5 Creedmoor. I like the new Tikka T3X and have been considering a Ruger American as well, but don't really want to replace the cheap stock. It will be a hunting rifle and something else to shoot when I get the urge. I'll probably stick to bullets it the 140gr range in either cartridge. The Creedmoor appears to top out at ~2700 fps with 140gr pills. The Swede sure seems like it could have a lot of potential in one of those new Tikka's!

300 WSM -trued Rem. 700 action -Krieger 26", fluted 1-10 twist #5.5 cerakoted sniper gray - HS Precision PSS134 Long Range Stock gray with black web -bedded action -Shrewd muzzle break -Rifle Basix trigger -pinned Holland recoil lug -Vortex Gen 1 Viper PST FFP 6-24x50 EBR-1 MOA -Nightforce ultra light medium rings -Talley 20 moa base -Vortex bubble level -RCBC dies Sub 1/2" rifle with hand loads, less than 50 rounds fired, estimated 10 -10.5 pounds w/ scope Minor ware mark on barrel from rubbing against tripod in my pack $3500 full set up and I'm willing to seperate scope NEW 6.5 Creedmoor -trued Rem. 700 action Krieger 26", 1-8 twist, #5, cerokoted sniper gray -Stocky's VG2 carbon fiber Viper Long Range -Shrewd muzzle break -bedded action -Trigger Tech Trigger -pinned Holland recoil lug -20 moa EGW base -PTG DBM with one 5 round AI composite mag -several Vortex scopes available upon request -estimate the rifle will weigh 10 pounds with scope -$2950.00 rifle only - willing to break in and develop load for $250.00 if interested Both rifles built by True Precision Rifles out of Colorado and will shoot sub 1/2" with quality hand loads I will be in Prescott and Phoenix area from 3/25 to 3/30 and am willing to bring the rifles with me for inspection and delivery Please call or text Brandon at 970-769-3655 Thanks for looking!

I had been ogling a used Kimber 84M Classic Select at Ruffs Guns in Flagstaff for quite a while and eventually succumbed to its temptation. Originally chambered in 243Win, it will be rebarreled to 6.5 Creedmoor. The SSSM barrel from Pac-Nor will arrive Monday. Everything should come together in time for the November 27th Coues hunt in 35A.

I am now selling my other Savage 6.5 Creedmoor. Rifle has about 350 rounds through it. I have 64 very precise loaded rounds that also go with gun. Brass is nosler, cci-br2 primers, h4350 @ 41.4 gn, and loaded with Berger 140 gn VLD hunting bullets. I will also provide the buyer with all the specs i have for this rifle like seating depth, powder info, throat info, headspace info, ect. This gun produces 2" groups at 750 yards. 2800 fps. This rifle is very precise and accurate. I am asking 2000.00 for everything above. Please see below for all other info. Does not come with scope or rings. Rifle parts: Savage model 10 action Shilen stainless steel select match 26" 6.5 Creedmoor NSS recoil lug and barrel nut Rifle basix trigger set at 1.5 lbs PTG fluted bolt body and PTG bolt head Glades Armory bolt knob Karsten comb HS Precision PSV 118 stock has been bedded with devcon Harris bipod HBLS swivel model with s/lock 20 moa Valdada base 64 loaded rounds; Nosler brass annealed after every firing CCI Br2 primers Berger VLD 140 gn hunting bullets H4350 at 41.4 gn 2800 fps ES 10 SD 4 This gun produces less than 1/4 groups consistently at 100 yards. Rifle with scope weights 11.5 lbs. This scope only weights 1.5 lbs so gun is about 10 lbs give or take 1/2 lbs 2 separate 3 shot groups 100 yards 10 shots at 100 yards Clay Price 928-200-0166

Well guys I did it again. I was so impressed by the repeat accuracy and precision from my first build I thought I would do another. This time I shopped around for months looking for a NEW donor action. My local gun shop had called me and told me he had found 3 of them. I wanted all 3 but could only get 1. The reason is the actions were COMPLETELY stripped, no triggers, no trigger housings not even the safety red dot. I was able to still get the action cheap enough I could order everything I needed from savage and other places. So I did. Here she is so far. Parts on gun: 6.5 creedmoor Shilen Stainless steel select match 26" 1:8 twist ratchet barrel HS Precision stock-Devcon bedded Karsten comb Northland Shooters Supply precision lug and trued nut Savage action model 10fcp w/factory trigger housing and firing pin PTG Bolt body PTG bolt head Rifle Basix trigger Valdada 20moa base and 30mm rings Parts still on there way: Sightron 6-24X50 LR FFP MOA scope (tuesday) Glades armory tactical bolt handle (today YAH) Tubb precision level (bubble level) (god knows when lol)

I have for sale like new Savage Model 11 Long Range Hunter 6.5 Creedmoor 26" **1700.00**. Comes with Valdada 6-24x50 35mm tube MP8 scope illuminated, Valdada base, Valdada Rings, open close muzzle break, accustock (work done to stock so stock was not touching barrel), accutrigger, karsten comb . This gun loves H4350 @ 42.2gn, 140 berger vld, Nosler or Hornady brass, CCI-BR2 primers this set up will produce a 1/4 moa group. Factory A max 140 will do 1/2 to 3/4 moa. If you are interested in Gun only I would be willing to sell just the gun 800.00 (no base, no rings and no scope). Scope was 1400.00, Gun 950, base 100. Gun has 200 rounds and was broke in correctly (shoot clean for 10, shoot 3 clean for 20, shoot 5 clean for 20.) I will post more pictures later.

Here is my son Zack shooting 1050 yards 13 mph winds no practice shots. This is his first time ever shooting this far target is 20 inches. Here i am shooting the same distance 1050 yards I shot first then my son shot 2nd. Again no practice shots 1st shot hits for both. My second shot at this distance hit same place as my first shot producing a 2" group. here are some more videos for your viewing. I just recorded from my phone while the camera was plugged into the TV so I can upload faster. I will get a full video edited and uploaded when i have time. My nephew Price is 10 years old and has only shot long range 2 times, my son of course shots as much as i do (100 rounds a week), my dad is also getting into the long range fun when I built him a 6.5 Creedmoor. Centering shot 500 yards 12" target Nephew shooting 550 yards 12" target My 2 shot group 2 weeks ago 760 yards 12" target My son 760 yards 12" target Nephew 760 yards 12" target Dad 750 yards 12" target Me 750 yards 12" target https://vimeo.com/101889561