200shootr

I just got a Oregon 550; does anyone know how to add these cords in bulk to a oregon 550. I input the cords into google earth and I get china.. I'm lost ;/ here's an example of a couple Log Latitude Longitude Elevation Tank Name No. (N) (W) (Feet) 027, 34,12.717, 112,42.497, 4418, ANTELOPE SPRING 017, 34,11.104, 112,49.644, 3088, ARROWHEAD WELL

I have .308 hornady dies and a Lee breech lock press, per the instructions that came with the dies it states to screw down the die until it touches the shell holder, I did that and then resized 25 rounds and loaded every single piece of brass. I tried them in my rifle and the bolt wouldn't close. I ended up cranking the die another 1 1/4 turns down and they now fit my rifle.. Is this normal with the hornady dies on a lee press?

Thanks guys for the info.. it was 3/4 turn not 1 1/4 , and yes I got there by doing 1/4 inch turns.

hunted 2 1/2 days in 20a and didn't see any sign or pigs.. we walked miles and glassed.

Driving by, saw a dead coyote at Hobart and greenfield in mesa; I pulled it off the road into the patch of dead weeds on the east side of greenfield road. Not sure if anyone is interested; If no one picks it up tonight I'll call for Dead Animal Pickup in the morning. I don't know how to skin them and I don't have a truck or I would of taken it..

I know its really late to work up a load for my general Javelina hunt in 3 weeks. I procrastinated getting powder until I had purchased all my equipment to reload; well now I have everything, and I managed to get some reloader17(which is all I could find). Does anyone have any load data for 165gr Nosler Accubonds as I'm not sure where to start.

Averagejoe, go ahead and pm me with how much you want for those.. mr1984, I sent you a pm

I have one pound of rl17 and I live in east mesa.. cottonwoods a 2 hour drive, I think I'll pass. I would love to trade if you were local

I'm afraid that getting a speer 165gr btsp or any others listed on the load data are impossible right now as powder is scarce as well.. just trying to find someone who has loaded these bullets with rl17. ;/

I was curious if someone knew a place in the East Valley that can sharpen a knife that I have. I know I can do it myself but it was a custom made knife and I don't want to mess it up. Thanks

Thanks I'll check it out!

I'm not sure what units are good but heres some info... http://www.nndfw.org/2013tsg.pdf

congrats guys, great pictures!!

good job and nice pig!!! can't wait for my ham hunt, i'm excited

SOLD!!

SOLD!!

Too late!!!!

If anyone is interested... I found the Foxpro Spitfire in the bargain cave online for 149.99 http://www.cabelas.com/product/FoxPro-Spitfire-Predator-Caller/734955.uts?WTz_l=Unknown%3Bcat105591780 They are selling it instore as well per the newspaper ad I saw.

Well I figured out how to put the cords into google earth, have to put a dash infront of the 112 or it still goes somewhere overseas.. Now I just need to get this list of cords to my gps.. I have about 60 locations; and would not like to sit here and input each one.. I used to email a guy with the cords I have and would in return kickback a kml file to me, but he might not check his email anymore; because I haven't gotten a response yet.. So I'm trying to go this route. thanks Well I pasted all the cords into a text file and did alot of find and replace; used gps visualizer to convert the csv file I made to a kml file for google earth and also outputted a file for my garmin. I'm not at home so I don't know if the gpx file will work but I'll let you know if you are interested. Google file works great on the pc

I have a stripped NFA polymer lower with a Palmetto State Armory Classic Lower Build Kit installed. I'm willing to part with as well. It's never been fired. looking for trades or cash. pm me

Could you let us know the outcome of the phone call.. I would be interested in hearing the answer. thanks

http://www.azgfd.gov/regs/elkregs.pdf

ok thanks.

I was drawn for hunt number 4035, in the regs it says the dates are Apr 26 - May 2, and May 10 - May 23, 2013 but on the draw page I get May 10 - May 23, 2013; can I goto either date or was I just drawn for the may 23rd date? thanks

I know this has less miles on it.. but I'm not sure if its odometer can be rolled back... http://www.corvette-dealers.com/used-for-sale/Arizona/Sierra%20Vista/8710/1957-Red-Chevrolet-Corvette.html