brent

Minn Kota Ulterra 24v 80lb thrust trolling motor. Comes with mounting bracket for second transducer. Taking it off a boat I purchased to fund a 36v tm. Located in Chandler. $2,800 new. Would be happy to get half that. Make me an offer. Thanks!

Dibs

Cool thanks Chris!

I have an old T. Barker 12 ga that I wouldn't mind selling to get something nicer. These were made from sometime in the 1890's - 1910's in Belgium. It has Damascus barrels, so its limited to shooting black powder loads. Some might say not to shoot it at all. One barrel has a very small dent that does not affect the pattern it throws. To go with it, I have 25 full length brass shells and I can also supply load data. Its pretty simple to load them up, you just pour in the black powder, over shot card, cushion wad, lead shot or bismuth, and over shot card. The only tool you need is a short wooden dowel rod to fit in the shell as a compactor. They have never needed resizing. You can get the cushion wads and cards from Ballistic Products or Dixie Gun works. I will take $300 for the double and shells.

Thanks Edge! Very kind of you.

I am located in Chandler. Not sure when I will be down that way next.

Still for sale! I found some reloading components to go with it. All you will need is some BP, shotshell primers, and shot. No special equipment necessary to load the shells. I Recommend buying the ballistic products guide to BP shotshell reloading for data.

sold

$30 for all

sold

All yours Jeffro.

Tire chains (pair) to fit 255/70/16 or similar tire. Free to a good home. Located in Chandler.

dang that is tempting!

Metal butt plate. Located in chandler

Last chance!

I have an old T. Barker 12 ga that I wouldn't mind selling to get something nicer. These were made from sometime in the 1890's - 1910's in Belgium. It has Damascus barrels, so its limited to shooting black powder loads. Some might say not to shoot it at all. One barrel has a very small dent that does not affect the pattern it throws. To go with it, I have 25 full length brass shells and I can also supply load data. Its pretty simple to load them up, you just pour in the black powder, over shot card, cushion wad, lead shot or bismuth, and over shot card. The only tool you need is a short wooden dowel rod to fit in the shell as a compactor. They have never needed resizing. You can get the cushion wads and cards from Ballistic Products or Dixie Gun works. I will take $300 for the double and shells.

sold

Parker of some kind? pm me first with price!

SPF

sold

sold

Thanks Dan!

For sinewy cuts there are two options imo: 1. Trim out the larger tendons and grind it up fine with the correct amount of pork fat. You might have to run it through a coarse die, get the meat icy cold again, and then run it through the fine die and mix with chorizo spices or breakfast sausage spices. 2. Cook the peice whole in a crockpot, insta pot, or oven. I do this with shanks and necks. Plenty of good recipies at https://honest-food.net/

All gone. Thanks everyone.

sold