Blade

Rifle $900 (online price) foregrip $30 pistol grip $25 flip up sights $100 sling $40 Scope $150 mag $15 tax $100 retail value $1360 Im asking $900 I'll be going to Phoenix this weekend and probably next if anyone wants to meet.

The bullets are still available. $79.99 $79.99 $12.80 (tax) $172.78 (retail value) I'm asking $150 I'll be going to Phoenix this weekend and probably next weekend if anyone wants to meet.

Die set SPF's The bullets are still available

I had to go down to the big city yesterday to run a few errands and thought I would give some free advertising for a few of the places I went to. So… in no particular order…. First was safelite auto glass on mesa drive and southern. They were very professional, friendly, and had great customer service. Next was Healy Arms on Country Club. Great customer service, very friendly, and they have fair prices on powder. Last but not least is Razors barber shop next to sportsmans warehouse in mesa. I always wear a hat and don’t care what my hair looks like but I do appreciate someone who pays attention to detail and takes pride in their work.

For 7mm-08 I either use varget or 4350. For the 139gr sst I use varget and for 150gr SMK I use 4350. I've never used RL15 or RL17. I would have to look at a burn rate chart but i think RL15 is about the same rate as 4350 and would probably work well. I think RL17 is closer to 4831 and i think it would be on the slow side for 7mm-08. I'm sure the 139gr sst would work fine on elk but I think the nosler partition or barnes tsx or ttsx would be better suited. We almost lost an elk last year on my cousins youth elk hunt using a 160gr sierra game king from a 7mm-08. I've killed 6 deer and one bear with sierra game kings and my dad has killed many deer, elk, and bear with sierra game kings so the bullet is capable of getting the job done but I think the nosler or the barnes is better suited for the job on elk.

Gen 3 Glock 20 asking $750 $700 includes: The gun set up with all factory parts except a 3.5lb trigger connector and spring 6in KKM Precision match grade drop in barrel 2-15 round magazines and 1-10 round magazine Lone wolf adjustable trigger stop housing, factory trigger connector and spring, full length stainless steel guide rod and spring Black hawk holster Safari Land holster 100 rounds of 180 gr FMJ ammo loaded over 9gr of 800x 95 rounds of 180 gr hornandy xtp ammo loaded over 9gr of 800x 15 rounds of Winchester silvertip factory ammo Over 200 (230+-) rounds of brass 2. NRA Commemorative Heritage Arms Rough Rider single action 357 magnum. It has a case hardened receiver and NRA engraved grip. I won this gun in a raffle last April at a FNRA dinner. I have the original box but there is a tear in the foam line of the box. I’m asking $450 $350 SOLD. If you have any questions let me know. Thanks for looking. 3. Savage 110 BA 338 Lapua Mag. Includes the rifle, RCBS dies and shell holder, hornady modified case, 33 caliber insert for the hornady oal guage, bore snake, 20 rounds of ammo loaded with 300 grain berger otm tactical over 88 grains of retumbo in lapua brass, 23 lapua brass cases sized, trimmed, chamfered/deburred, primed and ready to load. I’m asking $2000 $1900 SOLD!

The Glock 20 with all the extra stuff is still available.

Just a friendly suggestion but I would make sure the corners were set by a surveyor and the survey was recorded before I did anything. If I had a nickel for every time a dealt with a property owner who built something based off a bad corner I would be out in the hills this morning instead of at work. Depending on how long ago the corners were set and what type of corner its is it could be marked with different things. Most likely it would be a rebar or pipe set at or just below grade. If it's really old I've seen anything from a chiseled stone to an axle rod. It may have a brass tag on it also which would be nice. If the survey was recorded you should be able to get a copy from your county office. If it wasn't recorded it never happened legally speaking.

What are your corners marked with? What kind of fence are you putting up? Best practice usually is to put the fence one foot inside your property line.

TTT. Nothing says happy mothers day like a 10mm auto or a 338 lapua.

One time I quit chewing for a little over nine months. I went on a turkey hunt and decided to have a chew out two just while I was hunting. The cravings came back with a vengeance and I've been chewing again ever since. If you do decide to quit don't ever take another chew, not even one.

TTT

TTT

The Heritage Arms 357 is sold. Thanks David. The other two are still available. I'm going to Pheonix this weekend. If anyone is interested let me know and i will bring them with me.

Bumb to the top with price drops. I'll be in Phoenix this weekend. If you're interested either pm me on here or text me at 520eight, two, seven, 9195

I just dont see how Lee can afford to sell aluminum molds for $20 and other aluminum mold manufactures have to raise the price to $100. MT sourdough thanks for the tip. i have heard of people casting soft point cast bullets but wasnt sure how it was done. I was hoping to get drawn for elk this year and use cast bullets but maybe next year. Brent Ill have to check out e-bay. About six months ago i saw close to 100 different steal molds and handles sell at public surplus auction for just over $100. I'm still kicking myself for not bidding. The load I've been shooting out of my 29 is a hot 44 special or light 44 mag. I load them in 44 mag brass. I shoot the light load out of it for two reasons one becasue that was one of my dads guns and i would hate for somthing to happen to it and two sicne i got the s&w 460 if i need to get my recoil and muzzle blast fix the 460 takes cars of it

For the few "boolit" casters on here. Is there any manufacturer besides lee that sell a reasonably priced bullet mold? the Lee molds run about $20, everything else i have found is $80 to well over $100. I bought one Lee 45 cal 300 gr gas check mold that seems to be working ok. i was just wondering what else if available. overall i've been very pleased with my new casting hobby. i have a hot 44 special load with 250 gr bullets over 8.5 gr. of sr4756 that has been shooting very well out of my old pinned S&W 29. I also have a mild 357 mag load that has been shooting well out of my marlins and revolvers. Im still working on a good 460 S&W load.

bump

Did you still need brass? I just sent you a pm.

The 6mm remington is a great caliber! I killed my first deer with my dads 6mm when I was in 5th grade. It was built on a mauser 98 action, douglas premium barrel, and timney trigger. I still have that gun but havent shot it in years. Where are you located? I have a fair amount of 6mm brass and can probably spare some.

Hump day bump day. I should have been a rapper. If I can learn how to hold a pistol sideways I might stay a new career.

Thanks Curtis all three are nice guns I just rarely shot them so its time to go. I'm in superior but I will travel a reasonable distance to meet someone.

Ooops, sorry, i didnt read your entire post. I guess sizing down is out. Hope you find some.

If you have or can get 308 brass its very easy to make 7mm-08 brass. Just lube, full length resize, trim, chamfer and deber, prime, powder, plug, and shoot. I might have some range pick up 308 brass you can have.

I also use nickel cases in several calibers. Just be sure to use a carbide sizing die. The nickel will scratch regular steel dies.