rthrbhntng

I have the 10X14 Kodiak and two of the XL cots takes up a lot of room. Got a smaller cot for the GF. If you don't need the XLs don't get them. I have a large Butler bag so I need the XL. We have our tent set up with a cot on each side and a small 4' table in the back. Works well. Thing to keep in mind is that even though the floor is 10X14 the walls are angled and where the cot meets with wall, especially if the cross brace in the cot sticks out, you lose about a foot of room so the cot really sticks into the area you think you will have left. Borrow a cot first and try it out. If you need to borrow let me know I have 2 of the XLs, maybe one to sell, and one smaller one. Don't forget to protect the floor and I use cut tennis balls where the cot cross brace pokes the tent. Steve

My two cents worth. Keep the binos and buy a compact spotting scope. I have been down that road. Had the 10-42/15/56/and spotting scope. Have an 8-42 and the spotting scope now. In the woods the 8-42 if great, in the open the 10s and 15s are great as is the spotting scope. I spend most of my elk hunting time in the woods or juniper. If I am long range glassing I can see the elk or deer with the 8s then pull out the spotting scope. I have a pretty big Swaro scope. If I did it again I would go with a more compact scope. Steve

This is a great camp to bring a new young hunter to. If you have a young hunter that wants to learn about hunting please grab a tag and bring him or her out. The mentors will be able to take out the young hunters with a guardian and teach them to call and hunt turkeys. Meals are provided so get some gear for the young ones and bring them out. We are always looking for new hunters to carry on the Hunting Heritage. Steve

How about $300 OBO. Somebody must need a new one to replace their old one.

I have a brand new Lincoln 225/125 Arc Welder I have never used. I have misplaced the clamps so you will need to buy both clamps. The Lincoln Electric AC/DC 225/125 Welder features both AC and DC welding arcs with broad output ranges for versatile use. Ideal for jobs that require top arc-welding performance, the welder can be used for maintenance repair, fabrication, construction and other applications. The welder is great for use with a variety of variety of metals, including stainless steel, steel and cast iron. For use with metals 16 gauge and heavier Ideal for maintenance repair, fabrication, construction, erection, hard surfacing and other applications Welds a variety of metals including stainless steel, steel and cast iron Can be used to cut and pierce holes in steel Traditional AC arc with a smooth, stable DC arc Broad output ranges: AC 40 - 225 amps, DC 30 - 125 amps 1/8 in. wire diameter $400 OBO

Lowered to $400 OBO before taking to the auction yard.

SOLD

I have a couple of rifle scabbards I no longer use. One is Leather and padded and is 40" long and the other is Cordura and 41". I think the Cordura one is an older Trailmax. $50 ea. Steve

ttt

ttt

This is a Bow Scabbard manufactured by Nimrod. It has a cover that folds over the part of the bow that sticks out. $100. Steve

This is what you need to make your own log furniture or hand railing for your cabin. I have a 2" X 4 1/2" Tenon Cutter and a Barker Carriage and Clamp to cut uniform tenons. The carriage is set up for a Milwaukee 3/4" Hole Hawg drill. Barker Web Site to learn more about the system. Carriage and Clamp sells for $569 plus shipping and the Tenon Cutter sells for $299. $500 OBO. Steve

TrailMax Bow Scabbard. $40. Steve

I have a couple of sets of these Talley Scope Mounts. 1". Talley 930700 Low mounts or Talley 940700 Med mounts. Fit Remington 700-721-722-725. These are in unopened Packaging. $30ea Steve

Anyone looking for a FIrestone air bag kit for their Dodge Ram. Great way to stabilize and level your truck back out when you are carrying heavy loads. Especially if you are hauling a trailer. Picture is generic kit. New in the box, bolt on kit. Retails for $340. $275 OBO. Thanks Steve

Sent Pm. I will take the saw if still available. Steve Clark rthrbhntng@cox.net

I have 3 Briley like new chokes from a Browning Shotgun I no longer own. They are for the Invector Plus. Thought someone might need them. Like new. Skeet, Cylinder, Improved Cylinder. With Case and lube. $80.

According to the Briley web site the engraving on the chokes, INVPXL denotes Invector Plus.

SOLD Just in time for Christmas, no lines, no tax. This is a new 738 TCP .380 Taurus. Come new in the box with papers, extra clip, and case. SOLD PENDING FUNDS. Thanks

No Safety but is double action and has a built in hammer lock with a key. I am located near Cabela's and spend time in Tempe.

Good Luck Brian. You deserve a great Ram for all the work you put into this hunt. Steve

I will take the Savage Stock. rthrbhntng@gmail.com Steve

In an effort to give our members more bang for their buck we have instituted a member discount program and currently run a weekly drawing for all the members. The weekly prize right now until the end of the year is a $25 gift card to Cabela's. All current members are eligible for the drawing and you can win multiple times as long as it is once a month. Here is a link to the member discount program. The companies coming on board is growing at this time. http://www.arizonaelksociety.org/membership-discounts If you have a business or know someone that does that would be interested in getting on the list please let me know. We will be promoting is to thousands of hunters in Arizona in the near future. Thanks Steve stevec@arizonaelksociety.org

I have a unused older Bull Pack Frame. They run around $170 new. I would sell it for $100. Steve 602-885-0835 rthrbhntng@cox.net

Direct link to USFWS Comment page: http://www.regulations.gov/#!documentDetail;D=FWS-HQ-ES-2013-0073-19350