ctracingraptor

Pm replied, located near 35th Ave and Thunderbird

Yes, the fridge works just fine, I’ll plug it in for any interested buyers, not sure of the exact cubic feet 32”x 68”

Bump, any interest?

Thanks. I did that very thing when I put in the new sensor. I cleaned the connector, and the pins to make sure there was no fluid on them.You might never see a bad wire, visually it might be damaged on the inside and the rubber conduit might be in perfect shape. Very odd about the slow crank issue though, does it restart normally after its warmed up? During you 10 min warm up period, hold the rpm at 800 or so and put it in gear.

Check the harness or connector at or near the speed sensor, trans fluid will cause bad connection, and it will eventually eat the harness.

Selling my neighbors oak furniture, they are down sizing and are relocating to Florida, everything is solid oak, not particle board, should last forever. I figured I would post it up here, before I dealt with the headache of Craigslist. Not trying to get rich off this stuff, but all prices are OBO. Sorry for the typical sideways pics Headboard Bed set mattress, can include mattress W128xH72xD17 Dresser H48xW36xD17 Short dresser with vanity H30xW68xD17 measurements don’t include mirror End table or sofa table H28xW55xD17 Display cabinet H72xW24xD16 China or Display cabinet H78xW60xD20 Oak Table with 6 chairs L71xW42xH29

Do you have a picture? Might not be able to without removing the front side

I have a Thompson Center Venture 270 that consistently shoots groups like that with factory ammo, even ammo from different lots. Sad thing is it’s my wife’s gun, and I’ve had to work very hard to get groups like that with myself sendero.

Im happy to be able to finally share a build like this, lots of custom bolt guns that have turned out very nice, figured Id change it up a bit and share something different. I like that you can build one fairly simple, with almost no special tools. Got most of chassis put together, still waiting on my trigger, might just drop a extra one I have in for looks.

Father in law and I were discussing the usual gun and hunting conversations over the 4th, he's been dying to have a gun made in a specific caliber for a specific use. Im a fan of the caliber he wants, I used to even have one, but have since moved on to different calibers. I tried to convince him to try a different caliber, but he wouldnt budge. A man wants what a man wants, I get it. Lol. Stubborn as he may be I told him I would build him exactly what he is wanting. More to come on Monday when more parts show up.

Thanks, seems like it takes forever for stuff to arrive, when your anxiously waiting for it. Barrel is going to take the longest, just need my trigger to show up so I can assemble the lower

Some more goodies showed up today, this should turn out looking really nice... 😁😁

I had a 204, it's a wicked little round, pounded quite a few yotes with it, exploded a few rabbits and p-dogs with it as well. I've since then got rid of it, and switched to a Grendel, not because it's better, but the Grendel serves a larger spectrum for hunting.

Hes stubborn, Easiest way to explain, he's a man of few calibers, the way he explained it to me was he didnt want a bunch of different calibers in his safe, he has a 204 in a bolt gun, for 10 years hes been wanting one in a AR. As we know there are lots of excellent other choices , some very impressive new rounds came available with the last few years. Hes a man of speed I guess, only a few come close to what a 204 pushes. Im not saying there arent fastest rounds, or even better choices for ballistics. He doesnt reload anymore, and will be using shelf ammo, and he has a lot of shelf ammo lying around...

Yes, 204 ruger. I'm about month out on the barrel, should be fun to see a 204 with a can.

20 Cal... 😉

The 762 is a sweet round in that platform. The 9mm is really fun with a bump stock, I have a 10mm pistol and I can't see the use for it in a AR platform. This build won't be pistol caliber. Sorry for the crappy pic, 223 on a 75gn reload on the left, his caliber on the right

Brown Santa 🎅, brought some more goodies..

A family member of mine is a electrician, let me know if you want him to swing, he installed a a new breaker box on mine, my house is from the 70s and sparks we jumping out of it. Also added a bunch of outlets in my garage while waiting for aps to come back.

Still a new site, but it will slowly get more traffic. https://backpagegun.com/

Agreed, I feel asleep towards the end...

I really like the new benchmade in S90V

Dimensions?

Craftsman cordless drills, still work, make off Makita drill really old, still works but probably needs a battery or charger? Make offer Craftsman cordless 1/4" ratchet, still works, make offer Pair of small steel toolboxes, full of random tools, make offer Nuts and bolts storage organizer, full of hardware, plastic. Make offer Nuts and bolts, storage organizer, full of random stuff, all steel, make offer I would be easier to text or call me, 602-568-1418

I'm helping my elder neighbor clean out her garage, she is moving to Florida, and has no use for her late husband's old stuff. I'm not even sure if this stuff is worth much but I would rather see it go somewhere other than the landfill. Golf clubs with bag, Datrek golf bag, mostly Cougar irons, Spalding driver, not even sure about the putters, I don't even know if it's men's or women's clubs. $40? Used only once black and Decker jig saw, no blades $40? Almost full box of framing nails.. Make offer Old craftsman circular saw, 7 1/2 blade, comes with original box and I'll throw in a old jigsaw.. Make offer Really old craftsman circular saw, vintage and still works, cord is brittle. Comes with original box and comes with 6 extra saw blades.. Make offer Hard wheeled dolly or hand truck 17"wide 57"tall. $40? Camping water jugs $5 each? Pair of water coolers $10?