Big Tub

Interested but out of town tomorrow

where in nw tucson?

That auto of mine might be easier to sell?

what are the dates of mfg?

fixed choke?

Is the magazine original or an addition such that the old detent had to be removed?

The Loctite will decrease the friction factor on threaded fasteners thus increasing the pinch force that is applied through the fastener. Progressive tightening (like with lug nuts) is important to achieve uniformly distributed clamping forces . If you want to increase the cure speed to a few hours, you can use Loctite Primer T or N. HOWEVER, this does increase the cure time to the point that it may set up during the progressive tightening -- you only have about 5 minutes so don't dinky-dork around. It is also a good idea to degrease and thoroughly clean all the hardware before assembly. Putting Loctite on the rails and bases I question -- it only cures in the absense of oxygen (anaeorobic) and I'm not sure they are tight enough to exclude oxygen. I suppose if you use the primer, it may work. Epoxy would be more appropriate.

where are you located?

I had my Bonus Points taken away ... finally!

how is 34 XL?

With no pad, how does it kick?

Desert Bighorn in S AZ ...

That is a really cool gun.

Have you picture of any groups? Location? Also, what did you think of those 150 grn WT loads?

I was hoping the 520 code meant down here.

Nice Boy Toy! Location???

I have a pair of 8.5x44. Great Glass and solid but really heavy.

Hey My Rights: put the pics up if you get them?

one in the summer and one in the winter

One year they open up quail for pellet gun and then shot off bowhunting ... go figure.

Finally got my tags today ... I guess I don't have to worry about it not being real any longer.

Nice setup.

Did you use a dog? If so, we want a picture of the mighty beast also.

did you see this one? http://www.coueswhitetail.com/forums/topic/80647-thompson-center-muzzleloader/

So back to the subject: which hunting bullet for the .300 Win Mag for long range performance? Polymer tipped? Seems like Hornaday dropped their 150 grain SST and only have a 180 grain left. What's up with that?