azsugarbear

Sale Pending.

Did you find your Varget? If not, I may be able to help,

I have 100 count of new 300 RUM brass from Norma that I will probably never use. CWT always gets first shot on anything I am selling. Asking $150. Not looking for trades. No lowball offers. Don't need to sell these, but won't be using them for quite some time. First "I'll take it" in this thread trumps any PM's. This way, nobody gets to snipe your offer or turn it into an auction. That's just the way I roll. Everything out in the open for all to see. You can PM, text or call Karl at 602-361-7191.

SPF to Vowell.

Just a heads up: Red Hawk Rifles is having a flash sale on the Grayboe Terrain and Outlander models. Sale is limited to stock on hand. Offered at about 40% off retail.

This is a custom-made fire kettle that was initially made for Rev War & Mountain Man re-enactments. Not into that as much any more, but I still use it now and then for camping, cooking and general relaxing. Now with the grandkids all moved out of state, it just sits in the garage. Time for it to find a new home. When set up, it measure 24" tall and 24" in diameter. It has a three piece grate that makes for a smooth cooking top. When not in use, both the grates and the stand fit inside the kettle for compact storage. This is well made with heavier gauge steel and will outlive all of us. kept me warm on many a night. Asking $250. First "I'll take it" trumps any PM or text messages. That way, everybody knows who was first in line. Use PM and Text for any questions you may have. Not looking for any trades at this time. Karl 602-361-7191.

Clearing off the bench. Sightron scopes don't typically have the name recognition that some of the other manufacturers do. They don't advertise much, but what they do - is make a great scope for the dollar invested. They are best known for the clarity of their glass and repeatability of their turrets. This scope has a 30mm tube and allows for 100 MOA of travel for elevation. The reticle has 2moa stadia. It is a rugged, well-built scope that always returns to zero after dial-up. Read the reviews and look at the customer ratings on the various sites that sell these scopes. The Mark 4 rings are fitted for a picatinny rail. Asking $650 for both the scope and rings; or $600 for just the scope. Not looking for trades at this time. Low-ballers: walk right on by. First "I'll take it" in this thread trumps all PM's. That way, everything is out in the open and nobody can snipe your deal later on. Karl 602-361-7191. Located in North Phx - near Tatum & Bell

Scope & rings - SPF

HYNOON gets another thumbs up. Smooth transaction. Easy to deal with. Great communication.

Need to make more room in the garage. Selling my portable shooting table. I honestly can't remember where I bought this, but I have used it for nearly ten years so it has some bumps and nicks. It is lightweight, portable, has a built-in handle and stores well. Has no-slide, non-glare surface. Will support a lot of weight. Asking $60. Not looking for trades at this time. Low-ballers: walk right on by. First "I'll take it" in this thread trumps all PM's. That way, everything is out in the open and nobody can snipe your deal later on. Karl 602-361-7191. Located in North Phx area near Tatum & Bell Road.

SPF to HyNoon.

North Phx. - added location to description.

Used these on an antelope hunt in WY last year. Probably won't hunt up there again - and Lord knows If I will ever draw another antelope tag here in AZ. Need to clear off some shelf space in the garage, so these need to go to someone with an antelope hunt in their future. This is the combo package: young adult buck frontal and half body feeding doe. Asking $75. Not looking for trades at this time. Low-ballers: walk right on by. First "I'll take it" in this thread trumps all PM's. That way, everything is out in the open and nobody can snipe your deal later on. Karl 602-361-7191. Located in North Phx - near Tatum & Bell

I have an extra Sightron SIII 6-24x50 sitting in Leupold Mark 4 rings on my bench right now. It is a SFP scope with MOA stadia in a 30mm tube which gives you 100 MOA of travel. These scopes are best known for their extremely clear glass and reliable turrets for repeatable dial up and down. I still have the same model on my custom 6.5-06 AI rifle. Rugged, durable, excellent quality. Read about them here: https://sightronusa.com/riflescopes/siii-lr-series/ You should also read several online reviews and pay particular attention to the ratings that customers give these scopes. The scope usually retails for $800 or so. The rings go for $100+ when new. My price would be $650 for everything, or $600 for just the scope. This is a little higher quality than you can afford on your budget, but if you can stretch a little you will end up with something you will never have to upgrade down the road.

I have a semi-custom Remington Model 7 I need to sell. Custom barrel set up to shoot 105 gr. Bergers.

I'll take the IMR 7828. PM sent.

Left out of description: The barrel is a Benchmark SS fluted barrel with #4 contour (0.665 at the muzzle).

Specifying 7mm doesn't tell us anything about the required bolt face. It could be either a standard bolt face (7mm-08, etc.) or a magnum bolt face (7mm RM, 28 Nosler). Free bump.

I believe he just faced the receiver.

FB67 is GTG. he just bought a Proof Carbon Fiber barrel. Smooth transaction. Great guy to work with.

Going a different direction with my Tikka custom build, so this needs to find a new home. This is a stainless steel , carbon fiber barrel blank in 264 caliber with a 1 in 7.5" twist to stabilize the longer, heavier bullets.Barrel contour is their'Sendero Light'. Overall length is 26", so it should finish around 24+ inches. A great barrel for someone looking to build a lightweight, accurate rifle in 6.5 CM, 6.5 PRC, 6.5-284, etc. Price is: $675. Not looking for any trades at this time. Low Ballers - just keep on scrolling. I try to be up front with anything I sell. An "I'll take it" posted in the thread will trump any PM. Save the PM's for questions or other comments. If you prefer, you can call/text me at 602-361-7191, but the post in the thread trumps even that. This way, no late party can come and snipe your "I'll Take It" with a higher offer at a later date. It's just the way I do business. I try to give CWT members first shot when I sell, so this stock will not be posted on any other websites for the first week.

Sold. Positive feedback has been left.

Moving away from some of my Rem clone action re-barrel projects. This barrel was purchased to replace my 6.5-06 AI built on a custom Lawton action. Going to replace the 6.5-06 AI with a carbon pre-fit barrel in 6.5 PRC with Sendero contour on a Tikka action.

Going a different direction with my Tikka custom build, so this needs to find a new home. The stock is a right hand McMillan Hunter with a carbon fiber shell known as the "EDGE" option on their website. The inlet is for a factory Tikka T3/T3X factory sporter barrel and bottom metal. Color is OD n with black and tan speckles. Weighs around 26 ounces with a 13.5" LOP. Stock comes with aluminum pillars, action lug and two swivel studs. Stocks looks new, but it is gently used for a very short time. The stock has never been bedded. A new McMillan Hunter EDGE will cost you $637 plus shipping, along with a wait of 6-8 months. For those trying to wring the last bit of accuracy out of their factory rifle, this is a great way to go. Price is: $535. Not looking for any trades at this time. Low Ballers - just keep on scrolling. I try to be up front with anything I sell. An "I'll take it" posted in the thread will trump any PM. Save the PM's for questions or other comments. If you prefer, you can call/text me at 602-361-7191, but the post in the thread trumps even that. This way, no late party can come and snipe your "I'll Take It" with a higher offer at a later date. It's just the way I do business. I try to give CWT members first shot when I sell, so this stock will not be posted on any other websites for the first week.

SPF to Pburton. ( yes he is a newbie, but is well known as a long-standing member on another site).